Liu Yangsheng, Ma Lanlan, Li Yaqiong, Zheng Liting
Department of Environmental Engineering, College of Environmental Sciences, Peking University, Beijing 100871, China.
Chemosphere. 2007 Mar;67(5):1025-32. doi: 10.1016/j.chemosphere.2006.10.056. Epub 2006 Dec 20.
The contents of heavy metals and their bioavailability to the soil-plant system were the major limitation to the application of sewage sludge compost in soil. This study was conducted to determine the evolution of heavy metal speciation in the course of an aerobic composting, and investigate the influence of changes of composting process parameters including pH, temperature and organic matter (OM) content on distribution of heavy metal speciation in composted sludge. The sequential extraction procedure developed by Tessier et al. was used in sludge compost to determine the heavy metal speciation. Results showed that, during composting, (1) the contents of the residue fraction for Pb, Zn and Cd were decreased but those for Ni and Cr were increased; the Cu residue fraction was almost constant; (2) the contents of the total mobile fractions (including fractions 1-4) for Zn and Pb were significantly increased, but the increase of those for Cu and Ni were not so remarkable; (3) there were significant degrees of correlation between heavy metal fractions and changes of some selected parameters (for example, pH, composting temperature, and OM content). Only the content of the total mobile fractions for Cu could be predictable from its total content. For the prediction of the total mobile fractions of Zn, Ni, Cd and Cr, the R(2) value was significantly increased by the inclusion of other variables such as pH, temperature and OM content.
重金属含量及其对土壤 - 植物系统的生物有效性是污泥堆肥在土壤中应用的主要限制因素。本研究旨在确定好氧堆肥过程中重金属形态的演变,并研究堆肥过程参数(包括pH值、温度和有机质(OM)含量)的变化对堆肥污泥中重金属形态分布的影响。采用Tessier等人开发的连续提取程序来测定污泥堆肥中的重金属形态。结果表明,在堆肥过程中,(1)铅、锌和镉的残渣态含量降低,而镍和铬的残渣态含量增加;铜的残渣态含量几乎不变;(2)锌和铅的总可移动态(包括1 - 4态)含量显著增加,但铜和镍的增加不明显;(3)重金属形态与一些选定参数(如pH值、堆肥温度和OM含量)的变化之间存在显著的相关性。只有铜的总可移动态含量可以根据其总含量预测。对于锌、镍、镉和铬的总可移动态的预测,通过纳入其他变量(如pH值、温度和OM含量),R²值显著增加。