Surface modification for aluminium pigment inhibition.

This review concerns surface treatment of aluminium pigments for use in water borne coatings. Aluminium pigments are commonly used in coatings to give a silvery and shiny lustre to the substrate. Such paints and inks have traditionally been solvent borne, since aluminium pigment particles react with water. For environmental and health reasons solvent borne coatings are being replaced by water borne and the aluminium pigments then need to be surface modified in order to stand exposure to water. This process is called inhibition and both organic and inorganic substances are used as inhibiting agents. The organic inhibiting agents range from low molecular weight substances, such as phenols and aromatic acids, via surfactants, in particular alkyl phosphates and other anionic amphiphiles, to high molecular weight compounds, such as polyelectrolytes. A common denominator for them all is that they contain a functional group that interacts specifically with aluminium at the surface. A particularly strong interaction is obtained if the inhibiting agent contains functional groups that form chelating complex with surface Al(III). Encapsulation of the pigment can be made by in situ polymerization at the surface of the pigment and a recent approach is to have the polymerization occur within a double layer of adsorbed surfactant. The inorganic route is dominated by coating with silica, and recent progress has been made using an alkoxide, such as tetraethoxysilane as silica precursor. Such silica coated aluminium pigments are comparable in performance to chromate inhibited pigments and thus offer a possible heavy metal-free alternative. There are obvious connections between surface modifications made to prevent the pigment to react with water and inhibition of corrosion of macroscopic aluminium surfaces.