Pilon Jean-François, De Serres Sophie J, Feldman Anatol G
Department of Physiology, Neurological Science Research Center, Institute of Biomedical Engineering, University of Montreal, Montreal, QC, Canada.
Exp Brain Res. 2007 Jul;181(1):49-67. doi: 10.1007/s00221-007-0901-8. Epub 2007 Mar 6.
The grip force holding an object between fingers usually increases before or simultaneously with arm movement thus preventing the object from sliding. We experimentally analyzed and simulated this anticipatory behavior based on the following notions. (1) To move the arm to a new position, the nervous system shifts the threshold position at which arm muscles begin to be recruited. Deviated from their activation thresholds, arm muscles generate activity and forces that tend to minimize this deviation by bringing the arm to a new position. (2) To produce a grip force, with or without arm motion, the nervous system changes the threshold configuration of the hand. This process defines a threshold (referent) aperture (R(a)) of appropriate fingers. The actual aperture (Q(a)) is constrained by the size of the object held between the fingers whereas, in referent position R(a), the fingers virtually penetrate the object. Deviated by the object from their thresholds of activation, hand muscles generate activity and grip forces in proportion to the gap between the Q(a) and R(a). Thus, grip force emerges since the object prevents the fingers from reaching the referent position. (3) From previous experiences, the system knows that objects tend to slide off the fingers when arm movements are made and, to prevent sliding, it starts narrowing the referent aperture simultaneously with or somewhat before the onset of changes in the referent arm position. (4) The interaction between the fingers and the object is accomplished via the elastic pads on the tips of fingers. The pads are compressed not only due to the grip force but also due to the tangential inertial force ("load") acting from the object on the pads along the arm trajectory. Compressed by the load force, the pads move back and forth in the gap between the finger bones and object, thus inevitably changing the normal component of the grip force, in synchrony with and in proportion to the load force. Based on these notions, we simulated experimental elbow movements and grip forces when subjects rapidly changed the elbow angle while holding an object between the index finger and the thumb. It is concluded that the anticipatory increase in the grip force with or without correlation with the tangential load during arm motion can be explained in neurophysiological and biomechanical terms without relying on programming of grip force based on an internal model.
手指间握持物体时的握力通常会在手臂运动之前或同时增加,从而防止物体滑动。我们基于以下概念对这种预期行为进行了实验分析和模拟。(1) 为了将手臂移动到新位置,神经系统会改变手臂肌肉开始被募集的阈值位置。手臂肌肉偏离其激活阈值时,会产生活动和力量,这些活动和力量倾向于通过将手臂移动到新位置来最小化这种偏差。(2) 为了产生握力,无论有无手臂运动,神经系统都会改变手部的阈值配置。这个过程定义了合适手指的阈值(参考)孔径(R(a))。实际孔径(Q(a))受手指间握持物体大小的限制,而在参考位置R(a),手指实际上会穿透物体。手部肌肉因物体而偏离其激活阈值时,会产生与Q(a)和R(a)之间的差距成比例的活动和握力。因此,由于物体阻止手指到达参考位置,握力就会出现。(3) 根据以往经验,系统知道在进行手臂运动时物体往往会从手指上滑落,为防止滑落,它会在参考手臂位置变化开始之前或同时开始缩小参考孔径。(4) 手指与物体之间的相互作用是通过手指尖上的弹性垫来完成的。这些垫子不仅会因握力而被压缩,还会因物体沿手臂轨迹作用在垫子上的切向惯性力(“负载”)而被压缩。在负载力的作用下,垫子在手指骨和物体之间的间隙中来回移动,从而不可避免地与负载力同步并成比例地改变握力的法向分量。基于这些概念,我们模拟了受试者在食指和拇指间握持物体时快速改变肘部角度的实验性肘部运动和握力。得出的结论是,手臂运动期间握力的预期增加,无论是否与切向负载相关,都可以从神经生理学和生物力学角度进行解释,而无需依赖基于内部模型的握力编程。