Spears I R, Miller-Young J E, Sharma J, Ker R F, Smith F W
Sport and Exercise Subject Group, University of Teesside, Middlesbrough TS1 3BA, UK.
J Biomech. 2007;40(12):2774-80. doi: 10.1016/j.jbiomech.2007.01.004. Epub 2007 Mar 23.
Confinement of the heel due to the counter of the shoe is believed to influence heel pad biomechanics. Using a two-dimensional finite element model of the heel pad and shoe during a simulation of static standing, the aim of this study was to quantify the potential effect of confinement on internal heel pad stress. Non-weightbearing MRI and weightbearing MRI with plantar pressure and ground reaction force data were recorded for a single subject. The non-weightbearing MRI was used to create two FE models of the heel pad, using either homogeneous or composite material properties. The composite model included a distinction in material properties between fat pad and skin. Vertical and medial-lateral forces, as measured on the subject's heel, were applied to the models and vertical compressive strains for both models were comparable with those observed by weightbearing MRI. However, only for the composite model was the predicted plantar pressure distribution comparable with measured data. The composite model was therefore used in further analyses. In this composite model, the internal stresses were located mainly in the skin and were predominantly tensile in nature, whereas the stress state in the fat pad approached hydrostatic conditions. A representation of a running shoe, including an insole, midsole and heel counter was then added to the composite heel pad to form the shod model. In order to investigate the counter effect, the load was applied to the shod model with and without the heel counter. The effect of the counter on peak stress was to elevate compression (0-50%), reduce tension (22-34%) and reduce shear (22-28%) in the skin. In addition, the counter reduced both compressive (20-40%) and shear (58-80%) stress in the fat pad and tension in the fat pad remained negligible. Taken together the results indicate that a well-fitted counter works in sympathy with the internal structure of the heel pad and could be an effective reducer of heel pad stress. However, further research needs to be undertaken to assess the long-term effects on the soft-tissues, practicalities of achieving good fit and behavior under dynamic events.
鞋帮对足跟的束缚被认为会影响足跟垫的生物力学。本研究的目的是在静态站立模拟过程中,使用足跟垫和鞋子的二维有限元模型,量化束缚对足跟垫内部应力的潜在影响。记录了一名受试者的非负重MRI以及带有足底压力和地面反作用力数据的负重MRI。非负重MRI被用于创建两个足跟垫有限元模型,分别采用均质或复合材料属性。复合模型区分了脂肪垫和皮肤的材料属性。将在受试者足跟处测量的垂直力和内外侧力施加到模型上,两个模型的垂直压缩应变与负重MRI观察到的应变相当。然而,只有复合模型预测的足底压力分布与测量数据相当。因此,复合模型被用于进一步分析。在这个复合模型中,内部应力主要位于皮肤,且主要为拉伸应力,而脂肪垫中的应力状态接近静水压力状态。然后将包括鞋垫、中底和鞋帮的跑鞋模型添加到复合足跟垫模型中,形成穿鞋模型。为了研究鞋帮的影响,在有和没有鞋帮的情况下对穿鞋模型施加负荷。鞋帮对峰值应力的影响是提高皮肤中的压缩力(0 - 50%)、降低拉力(22 - 34%)和降低剪切力(22 - 28%)。此外,鞋帮降低了脂肪垫中的压缩应力(20 - 40%)和剪切应力(58 - 80%),脂肪垫中的拉力仍然可以忽略不计。综合来看,结果表明贴合良好的鞋帮与足跟垫的内部结构协同作用,可能是足跟垫应力的有效降低因素。然而,需要进一步研究来评估对软组织的长期影响、实现良好贴合的实际情况以及动态情况下的行为表现。