Suppr超能文献

跟高对鞋内局部三轴应力的影响。

Effect of heel height on in-shoe localized triaxial stresses.

机构信息

Department of Health Technology and Informatics, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong SAR, China.

出版信息

J Biomech. 2011 Aug 11;44(12):2267-72. doi: 10.1016/j.jbiomech.2011.05.036. Epub 2011 Jun 25.

Abstract

Abnormal and excessive plantar pressure and shear are potential risk factors for high-heeled related foot problems, such as forefoot pain, hallux valgus deformity and calluses. Plantar shear stresses could be of particular importance with an inclined supporting surface of high-heeled shoe. This study aimed to investigate the contact pressures and shear stresses simultaneously between plantar foot and high-heeled shoe over five major weightbearing regions: hallux, heel, first, second and fourth metatarsal heads, using in-shoe triaxial force transducers. During both standing and walking, peak pressure and shear stress shifted from the lateral to the medial forefoot as the heel height increased from 30 to 70mm. Heel height elevation had a greater influence on peak shear than peak pressure. The increase in peak shear was up to 119% during walking, which was about five times that of peak pressure. With increasing heel height, peak posterolateral shear over the hallux at midstance increased, whereas peak pressure at push-off decreased. The increased posterolateral shear could be a contributing factor to hallux deformity. It was found that there were differences in the location and time of occurrence between in-shoe peak pressure and peak shear. In addition, there were significant differences in time of occurrence for the double-peak loading pattern between the resultant horizontal ground reaction force peaks and in-shoe localized peak shears. The abnormal and drastic increase of in-shoe shear stresses might be a critical risk factor for shoe-related foot disorders. In-shoe triaxial stresses should therefore be considered to help in designing proper footwear.

摘要

异常和过度的足底压力和剪切力是高跟鞋相关足部问题的潜在风险因素,例如前足疼痛、拇外翻畸形和胼胝。在高跟鞋的倾斜支撑表面上,足底剪切力可能尤为重要。本研究旨在使用足底三轴力传感器同时研究足底与高跟鞋在五个主要承重区域(大脚趾、脚跟、第一、第二和第四跖骨头部)之间的接触压力和剪切力。在站立和行走时,随着鞋跟高度从 30 毫米增加到 70 毫米,峰值压力和剪切力从外侧转移到内侧前足。鞋跟高度升高对峰值剪切力的影响大于峰值压力。行走时峰值剪切力增加高达 119%,约为峰值压力的五倍。随着鞋跟高度的增加,中足时大脚趾的后外侧峰值剪切力增加,而蹬离时的峰值压力降低。增加的后外侧剪切力可能是大脚趾畸形的一个促成因素。结果发现,鞋内峰值压力和峰值剪切力的位置和发生时间存在差异。此外,在水平地面反作用力峰值和鞋内局部峰值剪切力的双峰值加载模式的发生时间上也存在显著差异。鞋内剪切力的异常和急剧增加可能是与鞋相关的足部疾病的关键风险因素。因此,应考虑鞋内三轴应力以帮助设计合适的鞋类。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验