Chiou Chwei-Huann, Juang Ruey-Shin
Department of Chemical Engineering and Materials Science, Yuan Ze University, Chung-Li 32003, Taiwan.
J Hazard Mater. 2007 Oct 1;149(1):1-7. doi: 10.1016/j.jhazmat.2007.03.035. Epub 2007 Mar 16.
Photocatalytic degradation of phenol in water was examined using Pr-doped TiO(2) nanoparticles. These photocatalysts were synthesized by an acid-peptized sol-gel method from titanium tetra-isopropoxide with different concentrations of Pr(III) dopant and calcination temperatures. Several tools such as XRD, BET surface area, SEM, and EDX, were used to evaluate particle structure, size distribution, and composition. The optical absorption properties of the prepared particles were also measured. Photocatalytic activity of the particles was studied in a batch reactor containing phenol solution with 400W UV irradiation. Parameters affecting photocatalytic process such as the catalyst crystallinity, light absorption efficiency, the dosage of catalyst, dopant and phenol concentrations were investigated. The Pr-doped TiO(2) showed high activity for photocatalytic degradation of phenol. The presence of Pr ions in the TiO(2) particles would cause a significant absorption shift towards the visible region. The degradation process was optimized using 1g/L Pr-doped TiO(2) with a Pr(III) concentration of 0.072 mol% after 2h irradiation. It was shown that photodegradation followed a pseudo-first-order kinetics and the rate constant changed with phenol concentration.
使用掺镨二氧化钛纳米颗粒研究了水中苯酚的光催化降解。这些光催化剂通过酸胶溶-凝胶法由四异丙醇钛与不同浓度的Pr(III)掺杂剂和煅烧温度合成。使用XRD、BET表面积、SEM和EDX等多种工具来评估颗粒结构、尺寸分布和组成。还测量了制备颗粒的光吸收特性。在含有苯酚溶液的间歇式反应器中,用400W紫外线照射研究了颗粒的光催化活性。研究了影响光催化过程的参数,如催化剂结晶度、光吸收效率、催化剂用量、掺杂剂和苯酚浓度。掺镨二氧化钛对苯酚的光催化降解表现出高活性。TiO(2)颗粒中Pr离子的存在会导致吸收显著向可见光区域移动。在2小时照射后,使用浓度为0.072 mol%的1g/L掺镨TiO(2)优化了降解过程。结果表明,光降解遵循准一级动力学,速率常数随苯酚浓度而变化。