Patel R P, Patel M M
Department of Pharmaceutics, S. K. Patel College of Pharmaceutical Education and Research, Ganpat University, Ganpat Vidyanagar, Kherva, Gujarat, India.
Pharm Dev Technol. 2007;12(1):21-33. doi: 10.1080/10837450601166510.
Solid dispersions in water-soluble carriers have attracted considerable interest as a means of improving the dissolution rate, and hence possibly bioavailability, of a range of hydrophobic drugs. The aim of the present study was to improve the solubility and dissolution rate of a poorly water-soluble drug, Lovastatin, by a solid dispersion technique. Solid dispersions were prepared by using polyethylene glycol 4000 (PEG 4000) and polyvinylpyrrolidone K30 (PVP K30) in different drug-to-carrier ratios. Dispersions with PEG 4000 were prepared by fusion-cooling and solvent evaporation, whereas dispersions containing PVP K30 were prepared by solvent evaporation technique. These new formulations were characterized in the liquid state by phase solubility studies and in the solid state by differential scanning calorimetry, X-ray powder diffraction, and FT-IR spectroscopy. The aqueous solubility of Lovastatin was favored by the presence of both polymers. The negative values of the Gibbs free energy and enthalpy of transfer explained the spontaneous transfer from pure water to the aqueous polymer environment. Solid-state characterization indicated Lovastatin was present as amorphous material and entrapped in polymer matrix. In contrast to the very slow dissolution rate of pure Lovastatin, the dispersion of the drug in the polymers considerably enhanced the dissolution rate. This can be attributed to improved wettability and dispersibility, as well as decrease of the crystalline and increase of the amorphous fraction of the drug. Solid dispersion prepared with PVP showed the highest improvement in wettability and dissolution rate of Lovastatin. Even physical mixture of Lovastatin prepared with both polymers also showed better dissolution profile than that of pure Lovastatin. Tablets containing solid dispersion prepared with PEG and PVP showed significant improvement in the release profile Lovastatin compared with tablets containing Lovastatin without PEG or PVP.
作为提高一系列疏水性药物溶解速率进而可能提高其生物利用度的一种手段,水溶性载体中的固体分散体已引起了广泛关注。本研究的目的是通过固体分散技术提高难溶性药物洛伐他汀的溶解度和溶解速率。采用聚乙二醇4000(PEG 4000)和聚乙烯吡咯烷酮K30(PVP K30)以不同的药物与载体比例制备固体分散体。含PEG 4000的分散体通过熔融冷却和溶剂蒸发法制备,而含PVP K30的分散体通过溶剂蒸发技术制备。这些新制剂在液态下通过相溶解度研究进行表征,在固态下通过差示扫描量热法、X射线粉末衍射和傅里叶变换红外光谱进行表征。两种聚合物的存在均有利于洛伐他汀的水溶性。吉布斯自由能和转移焓的负值解释了从纯水到聚合物水溶液环境的自发转移。固态表征表明洛伐他汀以无定形物质形式存在并包埋在聚合物基质中。与纯洛伐他汀非常缓慢的溶解速率相比,药物在聚合物中的分散显著提高了溶解速率。这可归因于润湿性和分散性的改善,以及药物结晶度的降低和无定形部分的增加。用PVP制备的固体分散体在洛伐他汀润湿性和溶解速率方面的改善最为显著。即使是用两种聚合物制备的洛伐他汀物理混合物,其溶解曲线也比纯洛伐他汀的更好。与不含PEG或PVP的洛伐他汀片剂相比,含PEG和PVP制备的固体分散体的洛伐他汀片剂在释放曲线方面有显著改善。