Mater L, Rosa E V C, Berto J, Corrêa A X R, Schwingel P R, Radetski C M
Universidade do Vale do Itajaí, Centro de Ciências Tecnológicas da Terra e do Mar, Itajaí SC 88302-202, Brazil.
J Hazard Mater. 2007 Oct 22;149(2):379-86. doi: 10.1016/j.jhazmat.2007.04.005. Epub 2007 Apr 5.
Simple measurements of H2O2 concentration or CO2 evolution were used to evaluate the effectiveness of the use of Fenton's reagent to mineralize organic compounds in water and soil contaminated by crude petroleum. This methodology is suitable for application in small treatment and remediation facilities. Reagent concentrations of H2O2 and Fe(2+) were found to influence the reaction time and temperature, as well as the degree of mineralization and biodegradability of the sample contaminants. Some H2O2/Fe(2+) combinations (H2O2 greater than 10% and Fe(2+) greater than 50mM) resulted in a strong exothermic reaction, which causes peroxide degradation and violent gas liberation. Up to 75% TOC removal efficiency was attained in water and 70% in soil when high H2O2 (20%) and low Fe(2+) (1mM) concentrations were used. Besides increasing the degree of mineralization, the Fenton's reaction enhances the biodegradability of petroleum compounds (BOD5/COD ratios) by a factor of up to 3.8 for contaminated samples of both water and soil. Our experiments showed that low reagent concentrations (1% H2O2 and 1mM Fe(2+)) were sufficient to start the degradation process, which could be continued using microorganisms. This leads to a decrease in reagent costs in the treatment of petroleum-contaminated water and soil samples. The simple measurements of H2O2 concentration or CO2 evolution were effective to evaluate the Fenton's reaction efficiency.
通过简单测量过氧化氢(H₂O₂)浓度或二氧化碳(CO₂)释放量,来评估使用芬顿试剂矿化受原油污染的水和土壤中有机化合物的效果。该方法适用于小型处理和修复设施。研究发现,H₂O₂和Fe(Ⅱ)的试剂浓度会影响反应时间和温度,以及样品污染物的矿化程度和生物降解性。一些H₂O₂/Fe(Ⅱ)组合(H₂O₂大于10%且Fe(Ⅱ)大于50mM)会导致强烈的放热反应,从而引起过氧化物降解和剧烈的气体释放。当使用高浓度H₂O₂(20%)和低浓度Fe(Ⅱ)(1mM)时,水中TOC去除效率高达75%,土壤中为70%。除了提高矿化程度外,芬顿反应还能将石油化合物的生物降解性(BOD₅/COD比值)提高多达3.8倍,对于水和土壤的污染样品均如此。我们的实验表明,低试剂浓度(1% H₂O₂和1mM Fe(Ⅱ))足以启动降解过程,后续可利用微生物继续进行。这使得在处理受石油污染的水和土壤样品时试剂成本降低。简单测量H₂O₂浓度或CO₂释放量可有效评估芬顿反应效率。