Chang Yu-Fen, Wang Shiu-Mei, Huang Kuo-Jung, Wang Chin-Tien
Institute of Public Health, National Yang-Ming University School of Medicine, Taipei, Taiwan.
J Mol Biol. 2007 Jul 13;370(3):585-97. doi: 10.1016/j.jmb.2007.05.020. Epub 2007 May 22.
We introduced mutations into the HIV-1 major homology region (MHR; capsids 153-172) and adjacent C-terminal region to analyze their effects on virus-like particle (VLP) assembly, membrane affinity, and the multimerization of the Gag structural protein. Results indicate that alanine substitutions at K158, F168 or E175 significantly diminished VLP production. All assembly-defective Gag mutants had markedly reduced membrane-binding capacities, but results from a velocity sedimentation analysis suggest that most of the membrane-bound Gag proteins were present, primarily in a higher-order multimerized form. The membrane-binding capacity of the K158A, F168A, and E175A Gag proteins increased sharply upon removal of the MA globular domain. While demonstrating improved multimerization capability, the two MA-deleted versions of F168A and E175A did not show marked improvement in VLP production, presumably due to a defect in association with the raft-like membrane domain. However, K158A bound to detergent-resistant raft-like membrane; this was accompanied by noticeably improved VLP production following MA removal. Our results suggest that the HIV-1 MHR and adjacent downstream region facilitate multimerization and tight Gag packing. Enhanced Gag multimerization may help expose the membrane-binding domain and thus improve Gag membrane binding, thereby promoting Gag multimerization into higher-order assembly products.
我们在HIV-1主要同源区域(MHR;衣壳153-172)及相邻的C末端区域引入突变,以分析它们对病毒样颗粒(VLP)组装、膜亲和力以及Gag结构蛋白多聚化的影响。结果表明,K158、F168或E175处的丙氨酸替代显著减少了VLP的产生。所有组装缺陷型Gag突变体的膜结合能力均明显降低,但速度沉降分析结果表明,大多数膜结合的Gag蛋白主要以高阶多聚化形式存在。去除MA球状结构域后,K158A、F168A和E175A Gag蛋白的膜结合能力急剧增加。虽然F168A和E175A的两个缺失MA的版本显示出多聚化能力有所提高,但VLP产生并未显著改善,推测是由于与筏样膜结构域结合存在缺陷。然而,K158A与抗去污剂的筏样膜结合;去除MA后,VLP产生明显改善。我们的结果表明,HIV-1 MHR及相邻的下游区域促进多聚化和Gag的紧密包装。增强的Gag多聚化可能有助于暴露膜结合结构域,从而改善Gag与膜的结合,进而促进Gag多聚化形成高阶组装产物。