Kéki Sándor, Tóth Katalin, Zsuga Miklós, Ferenczi Renáta, Antus Sándor
Department of Applied Chemistry, University of Debrecen, H-4010 Debrecen, P.O. Box 1, Hungary.
Rapid Commun Mass Spectrom. 2007;21(14):2255-62. doi: 10.1002/rcm.3081.
The fragmentation behavior of (+)-silybin (1) and (+)-deuterosilybin (2), as well as of their flavanone-3-ol-type building blocks, such as 3,5,7-trihydroxy-2-phenyl-4-chromanone (3) and 2-(1,4-benzodioxolanyl)-3,5,7-trihydroxy-4-chromanone (4), were investigated by atmospheric pressure chemical ionization quadropole time-of-flight tandem mass spectrometry in the positive ion mode (APCI(+)-QqTOF MS/MS). The product ion spectra of the protonated molecules of 1 revealed a rather complicated fragmentation pattern with product ions originating from consecutive and competitive loss of small molecules such as H2O, CO, CH2O, CH3OH and 2-methoxyphenol, along with the A+- and B+-type ions arising from the cleavage of the C-ring of the flavanone-3-ol moiety. The elucidation of the fragmentation behavior of 1 was facilitated by acquiring information on the fragmentation characteristics of the flavanone-3-ol moieties and 2. The capability of the accurate mass measurement on the quadrupole time-of-flight mass spectrometer allowed us to determine the elemental composition of each major product ion. Second-generation product ion spectra obtained by combination of in-source collision induced dissociation (CID) with selective CID (pseudo-MS(3)) was also helpful in elaborating the fragmentation pathways and mechanism. Based on the experimental results, a fragmentation mechanism as well as fragmentation pathways for 1 and its flavanone-3-ol building blocks (3, 4) are proposed and discussed.
采用大气压化学电离四极杆飞行时间串联质谱正离子模式(APCI(+)-QqTOF MS/MS)研究了(+)-水飞蓟宾(1)和(+)-氘代水飞蓟宾(2)及其黄烷酮-3-醇型结构单元(如3,5,7-三羟基-2-苯基-4-色原酮(3)和2-(1,4-苯并二氧杂环戊烯基)-3,5,7-三羟基-4-色原酮(4))的碎裂行为。1的质子化分子的产物离子谱显示出相当复杂的碎裂模式,产物离子源于小分子如H2O、CO、CH2O、CH3OH和2-甲氧基苯酚的连续和竞争性丢失,以及黄烷酮-3-醇部分C环裂解产生的A+型和B+型离子。通过获取黄烷酮-3-醇部分和2的碎裂特征信息,有助于阐明1的碎裂行为。四极杆飞行时间质谱仪的精确质量测量能力使我们能够确定每个主要产物离子的元素组成。通过源内碰撞诱导解离(CID)与选择性CID(伪MS(3))相结合获得的第二代产物离子谱也有助于详细阐述碎裂途径和机理。基于实验结果,提出并讨论了1及其黄烷酮-3-醇结构单元(3,4)的碎裂机理和碎裂途径。