Bhalerao G M, Waugh S, Ingale Alka, Sinha A K, Babu M, Tiwari P, Nandedkar R V
Synchrotron Utilization and Materials Research Division, Raja Ramanna Centre for Advanced Technology, Indore 452013, India.
J Nanosci Nanotechnol. 2007 Jun;7(6):1860-6. doi: 10.1166/jnn.2007.731.
Multiwalled carbon nanotubes (MWCNTs) were grown on a novel ASC catalyst and on catalyst deposited by SCC method on silicon wafer, by thermal CVD of acetylene. Fe and Ni were used as catalyst for ASC. Samples were analyzed by SEM and Raman spectroscopy. SEM analysis shows that CNTs grown on ASC have narrower diameter distribution (64+/-6 nm) compared to CNTs grown on SCC (67+/-10.5 nm). However, SEM and Raman spectroscopy studies show CNTs grown on SCC are of better quality. The same samples were studied after standard purification procedure of oxidation after annealing at high temperatures. SEM and Raman spectroscopy show that overall quality of ensemble of CNTs has improved. After annealing, diameter decreases for larger diameter approximately 200 nm nanotubes while it increases for CNTs of smaller diameter approximately 70 nm. To explain the increase in diameter of approximately 70 nm CNT's, a phenomenological model has been proposed. The results of Raman spectroscopy and SEM corroborate the proposed model.
通过乙炔的热化学气相沉积法,在新型自支撑催化剂(ASC)以及通过自催化化学腐蚀(SCC)方法沉积在硅片上的催化剂上生长多壁碳纳米管(MWCNT)。铁和镍用作ASC的催化剂。通过扫描电子显微镜(SEM)和拉曼光谱对样品进行分析。SEM分析表明,与在SCC上生长的碳纳米管(67±10.5纳米)相比,在ASC上生长的碳纳米管具有更窄的直径分布(64±6纳米)。然而,SEM和拉曼光谱研究表明,在SCC上生长的碳纳米管质量更好。在高温退火后进行标准氧化纯化程序后,对相同的样品进行了研究。SEM和拉曼光谱表明,碳纳米管整体质量有所提高。退火后,直径约为200纳米的较大直径纳米管直径减小,而直径约为70纳米的较小直径碳纳米管直径增加。为了解释直径约70纳米碳纳米管直径增加的现象,提出了一个唯象模型。拉曼光谱和SEM的结果证实了所提出的模型。