Torkzaban Saeed, Bradford Scott A, Walker Sharon L
Department of Chemical and Environmental Engineering, University of California, Riverside, Riverside, California 92521, USA.
Langmuir. 2007 Sep 11;23(19):9652-60. doi: 10.1021/la700995e. Epub 2007 Aug 18.
Transport of colloidal particles in porous media is governed by the rate at which the colloids strike and stick to collector surfaces. Classic filtration theory has considered the influence of system hydrodynamics on determining the rate at which colloids strike collector surfaces, but has neglected the influence of hydrodynamic forces in the calculation of the collision efficiency. Computational simulations based on the sphere-in-cell model were conducted that considered the influence of hydrodynamic and Derjaguin-Landau-Verwey-Overbeek (DLVO) forces on colloid attachment to collectors of various shape and size. Our analysis indicated that hydrodynamic and DLVO forces and collector shape and size significantly influenced the colloid collision efficiency. Colloid attachment was only possible on regions of the collector where the torque from hydrodynamic shear acting on colloids adjacent to collector surfaces was less than the adhesive (DLVO) torque that resists detachment. The fraction of the collector surface area on which attachment was possible increased with solution ionic strength, collector size, and decreasing flow velocity. Simulations demonstrated that quantitative evaluation of colloid transport through porous media will require nontraditional approaches that account for hydrodynamic and DLVO forces as well as collector shape and size.
胶体颗粒在多孔介质中的传输受胶体撞击并附着在收集器表面的速率控制。经典过滤理论考虑了系统流体动力学对确定胶体撞击收集器表面速率的影响,但在计算碰撞效率时忽略了流体动力的影响。基于细胞内球体模型进行了计算模拟,该模型考虑了流体动力和德亚金-朗道-韦弗-奥弗贝克(DLVO)力对胶体附着于各种形状和尺寸收集器的影响。我们的分析表明,流体动力和DLVO力以及收集器的形状和尺寸显著影响胶体碰撞效率。胶体仅能附着在收集器上这样的区域,即作用于靠近收集器表面胶体上的流体动力剪切力产生的扭矩小于阻止分离的粘附(DLVO)扭矩的区域。可能发生附着的收集器表面积分数随溶液离子强度、收集器尺寸的增加以及流速的降低而增加。模拟表明,对胶体在多孔介质中传输进行定量评估将需要采用非传统方法,这些方法要考虑流体动力和DLVO力以及收集器的形状和尺寸。