Suppr超能文献

SrAl2O4:Eu2+、Dy3+、Tb3+ 荧光粉的燃烧合成及发光性能

Combustion synthesis and luminescence properties of SrAl2O4:Eu2+, Dy3+, Tb3+ phosphor.

作者信息

Song Huajie, Chen Donghua

机构信息

Hubei Key Laboratory for Catalysis and Material Science, College of Chemistry and Material Science, South Central University for Nationalities, Wuhan , Hubei, People's Republic of China.

出版信息

Luminescence. 2007 Nov-Dec;22(6):554-8. doi: 10.1002/bio.1000.

Abstract

Eu(2+), Dy(3+) and Tb(3+) co-doped strontium aluminate phosphor with high brightness and long afterglow was synthesized by a combustion method, using urea as a reducer. The properties of SrAl(2)O(4):Eu(2+),Dy(3+),Tb(3+) phosphor with a series of initiating combustion temperatures, urea concentrations and boric acid molar fractions were investigated. The sample at initiating combustion temperature of 600 degrees C exhibited an intense emission peak at 513 nm, in which the phosphor existed as a single-phase monoclinic structure. The experimental results showed that the optimum ratio of urea is 2.0 times higher than theoretical quantities and that the suitable molar fraction of H(3)BO(3) is 0.08. The average particle size of the phosphor was 50-80 nm and its luminescence properties were studied systematically. Compared with SrAl(2)O(4):Eu(2+),Dy(3+) phosphor, the initial luminescence brightness improved from 2.50 candela (cd)/m(2) to 3.55 cd/m(2) and the long afterglow time was prolonged from 1290 s to 2743 s.

摘要

以尿素为还原剂,采用燃烧法合成了具有高亮度和长余辉的铕(Eu(2+))、镝(Dy(3+))和铽(Tb(3+))共掺杂铝酸锶磷光体。研究了一系列引发燃烧温度、尿素浓度和硼酸摩尔分数的SrAl(2)O(4):Eu(2+),Dy(3+),Tb(3+)磷光体的性能。引发燃烧温度为600℃的样品在513nm处有一个强烈的发射峰,其中磷光体以单相单斜结构存在。实验结果表明,尿素的最佳比例比理论量高2.0倍,合适的硼酸摩尔分数为0.08。磷光体的平均粒径为50-80nm,并对其发光性能进行了系统研究。与SrAl(2)O(4):Eu(2+),Dy(3+)磷光体相比,初始发光亮度从2.50坎德拉(cd)/m(2)提高到3.55 cd/m(2),长余辉时间从1290s延长到2743s。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验