Ucun Handan, Bayhan Yalcin Kemal, Kaya Yusuf
Department of Environmental Engineering, Engineering Faculty, Atatürk University, Erzurum, Turkey.
J Hazard Mater. 2008 May 1;153(1-2):52-9. doi: 10.1016/j.jhazmat.2007.08.018. Epub 2007 Aug 12.
Biosorption equilibrium, kinetics and thermodynamics of chromium(VI) ions onto cone biomass were studied in a batch system with respect to temperature and initial metal ion concentration. The biosorption efficiency of chromium ions to the cone biomass decreased as the initial concentration of metal ions was increased. But cone biomass of Pinus sylvestris Linn. exhibited the highest Cr(VI) uptake capacity at 45 degrees C. The biosorption efficiency increased from 67% to 84% with an increase in temperature from 25 to 45 degrees C at an initial Cr(VI) concentration of 300 mg/L. The Langmuir isotherm model was applied to experimental equilibrium data of Cr(VI) biosorption depending on temperature. According to Langmuir isotherm, the monolayer saturation capacity (Q(max)) is 238.10 mg/g. The pseudo-first-order and pseudo-second-order kinetic models were applied to test the experimental data for initial Cr(VI). The pseudo-second-order kinetic model provided the best correlation of the used experimental data compared to the pseudo-first-order kinetic model. The activation energy of biosorption (E(a)) was determined as 41.74 kJ/mol using the Arrhenius equation. Using the thermodynamic equilibrium coefficients obtained at different temperatures, the thermodynamic constants of biosorption (DeltaG(0), DeltaH(0) and DeltaS(0)) were also evaluated.
在间歇系统中,研究了温度和初始金属离子浓度对铬(VI)离子在松果生物质上的生物吸附平衡、动力学和热力学的影响。随着金属离子初始浓度的增加,铬离子对松果生物质的生物吸附效率降低。但欧洲赤松的松果生物质在45℃时表现出最高的Cr(VI)吸附容量。在初始Cr(VI)浓度为300mg/L时,随着温度从25℃升高到45℃,生物吸附效率从67%提高到84%。将朗缪尔等温线模型应用于不同温度下Cr(VI)生物吸附的实验平衡数据。根据朗缪尔等温线,单层饱和容量(Q(max))为238.10mg/g。应用伪一级和伪二级动力学模型对初始Cr(VI)的实验数据进行测试。与伪一级动力学模型相比,伪二级动力学模型对所使用的实验数据提供了最佳的相关性。使用阿伦尼乌斯方程确定生物吸附的活化能(E(a))为41.74kJ/mol。利用在不同温度下获得的热力学平衡系数,还评估了生物吸附的热力学常数(ΔG(0)、ΔH(0)和ΔS(0))。