Four aspects of creep phenomena in striated muscle.

Four aspects of the slow creep of tension and sarcomere lengths observed during fixed-end tetani are studied with computer simulations, using the instantaneous steady-state (adiabatic) approximation. (1) Most aspects of fixed-end creep phenomena can be simulated in the presence of the passive forces which correctly produce initially shortened end sarcomeres. However, the very large maximum tensions observed with fibres of low resting force for sarcomere lengths greater than 3.0 microns cannot be simulated within the adiabatic approximation. (2) Random variations in the passive tension-length curve between different sarcomeres can predict the reported incidence of contracting sarcomeres in the middle of the fibre, while avoiding significant tension creep when a central segment is length-clamped. They can also reverse the velocity of these sarcomeres during creep in fibres with high resting tension, as observed by Altringham and Bottinelli (1985). At sarcomere lengths of greater than or equal to 3.4 microns we find that spatial variations in passive tension strength also contribute to tension creep. (3) Crossbridge fluctuations in active tension have been estimated from the sliding-filament model, and do not contribute significantly to tension creep. (4) The need for inter-sarcomere stiffness or other mechanisms to produce an additional slow rise in tension at long times, and to smooth the sarcomere length distribution, is assessed.