Pitol Dimitrius Leonardo, Caetano Flavio Henrique, Lunardi Laurelúcia Orive
Department of Morphology, Stomatology and Physiology, School of Dentistry of Ribeirão Preto, University of São Paulo, Ribeirão Preto, SP, Brazil.
Braz Dent J. 2007;18(2):153-7. doi: 10.1590/s0103-64402007000200013.
Bone decalcification is a time-consuming process. It takes weeks and preservation of the tissue structure depends on the quality and velocity of the demineralization process. In the present study, a decalcification methodology was adapted using microwaving to accelerate the decalcification of rat bone for electron microscopic analysis. The ultrastructure of the bone decalcified by microwave energy was observed. Wistar rats were perfused with paraformaldehyde and maxillary segments were removed and fixed in glutaraldehyde. Half of specimens were decalcified by conventional treatment with immersion in Warshawsky solution at 4 degrees C during 45 days, and the other half of specimens were placed into the beaker with 20 mL of the Warshawsky solution in ice bath and thereafter submitted to irradiation in a domestic microwave oven (700 maximum power) during 20 s/350 W/+/-37 degrees C. In the first day, the specimens were irradiated 9 times and stored at 40 degrees C overnight. In the second day, the specimens were irradiated 20 times changing the solution and the ice after each bath. After decalcification, some specimens were postfixed in osmium tetroxide and others in osmium tetroxide and potassium pyroantimonate. The specimens were observed under transmission electron microscopy. The results showed an increase in the decalcification rate in the specimens activated by microwaving and a reduction of total experiment time from 45 days in the conventional method to 48 hours in the microwave-aided method.
骨脱钙是一个耗时的过程。这需要数周时间,并且组织结构的保存取决于脱矿过程的质量和速度。在本研究中,采用微波脱钙方法来加速大鼠骨骼脱钙以便进行电子显微镜分析。观察了经微波能量脱钙的骨超微结构。用多聚甲醛灌注Wistar大鼠,取出上颌骨段并固定于戊二醛中。一半标本采用常规处理,于4℃下浸泡在Warshawsky溶液中45天进行脱钙,另一半标本置于装有20 mL Warshawsky溶液的烧杯中,在冰浴中,然后在家用微波炉(最大功率700)中于20秒/350瓦/±37℃下照射。第一天,标本照射9次,并于40℃下过夜保存。第二天,标本照射20次,每次照射后更换溶液和冰块。脱钙后,一些标本用四氧化锇后固定,另一些用四氧化锇和焦锑酸钾后固定。在透射电子显微镜下观察标本。结果显示,微波激活的标本脱钙率增加,总实验时间从传统方法的