Suppr超能文献

药物机械性溶栓及血管成形术治疗血液透析移植物血栓形成:早期及晚期临床结果

Pharmacomechanical thrombolysis and angioplasty in the management of clotted hemodialysis grafts: early and late clinical results.

作者信息

Valji K, Bookstein J J, Roberts A C, Davis G B

机构信息

Department of Radiology, UCSD Medical Center 92103.

出版信息

Radiology. 1991 Jan;178(1):243-7. doi: 10.1148/radiology.178.1.1824582.

Abstract

The results of pharmacomechanical thrombolysis and angioplasty of 121 thrombosed hemodialysis grafts were reviewed. The initial pharmacomechanical method (used in 65 cases) employed clot maceration with hook-shaped catheters and clot lacing with highly concentrated urokinase. The current technique (used in 56 cases) consisted of pulsed-spray injection of urokinase into the clot. All fully treated grafts (117 cases) underwent complete or near-complete thrombolysis, and 93% remained patent after 1 day. Mean time for pulsed-spray lysis was 46 minutes +/- 21. One patient (less than 1%) had gastrointestinal bleeding and received a transfusion; minor complications occurred in 3% of patients. Primary and secondary graft patency rates for both methods at 1 year were 26% and 51%, respectively. While graft age and results of angioplasty did not influence future graft patency, shorter intervals between graft thromboses was predictive of earlier subsequent graft failure. Results suggest that pharmacomechanical thrombolysis and angioplasty provide rapid, consistent, and safe recanalization of clotted hemodialysis grafts and represent a promising additional therapeutic approach to long-term graft management.

摘要

回顾了121例血栓形成的血液透析移植物的药物机械溶栓和血管成形术的结果。最初的药物机械方法(65例使用)采用钩形导管进行血栓浸渍和用高浓度尿激酶进行血栓缠绕。当前技术(56例使用)包括将尿激酶脉冲喷射注入血栓。所有完全治疗的移植物(117例)均实现了完全或接近完全溶栓,93%在1天后保持通畅。脉冲喷射溶栓的平均时间为46分钟±21分钟。1例患者(不到1%)出现胃肠道出血并接受了输血;3%的患者出现轻微并发症。两种方法在1年时的初次和二次移植物通畅率分别为26%和51%。虽然移植物使用时间和血管成形术结果不影响未来移植物通畅情况,但移植物血栓形成间隔时间较短预示着随后移植物更早失败。结果表明,药物机械溶栓和血管成形术能为血栓形成的血液透析移植物提供快速、一致且安全的再通,是长期移植物管理中一种有前景的额外治疗方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验