Gennisson J-L, Rénier M, Catheline S, Barrière C, Bercoff J, Tanter M, Fink M
Laboratoire Ondes et Acoustique, ESPCI, CNRS UMR 7587, INSERM, Université Paris VII, 10 rue Vauquelin, 75231 Paris cedex 05, France.
J Acoust Soc Am. 2007 Dec;122(6):3211-9. doi: 10.1121/1.2793605.
The assessment of viscoelastic properties of soft tissues is enjoying a growing interest in the field of medical imaging as pathologies are often correlated with a local change of stiffness. To date, advanced techniques in that field have been concentrating on the estimation of the second order elastic modulus (mu). In this paper, the nonlinear behavior of quasi-incompressible soft solids is investigated using the supersonic shear imaging technique based on the remote generation of polarized plane shear waves in tissues induced by the acoustic radiation force. Applying a theoretical approach of the strain energy in soft solid [Hamilton et al., J. Acoust. Soc. Am. 116, 41-44 (2004)], it is shown that the well-known acoustoelasticity experiment allowing the recovery of higher order elastic moduli can be greatly simplified. Experimentally, it requires measurements of the local speed of polarized plane shear waves in a statically and uniaxially stressed isotropic medium. These shear wave speed estimates are obtained by imaging the shear wave propagation in soft media with an ultrafast echographic scanner. In this situation, the uniaxial static stress induces anisotropy due to the nonlinear effects and results in a change of shear wave speed. Then the third order elastic modulus (A) is measured in agar-gelatin-based phantoms and polyvinyl alcohol based phantoms.
由于病变通常与组织硬度的局部变化相关,软组织粘弹性特性的评估在医学成像领域越来越受到关注。迄今为止,该领域的先进技术一直集中在二阶弹性模量(μ)的估计上。本文基于声辐射力在组织中远程产生极化平面剪切波的超音速剪切成像技术,研究了准不可压缩软固体的非线性行为。应用软固体应变能的理论方法[汉密尔顿等人,《美国声学学会杂志》116, 41 - 44 (2004)],结果表明,能够恢复高阶弹性模量的著名声弹性实验可以大大简化。在实验上,它需要测量静态和单轴应力各向同性介质中极化平面剪切波的局部速度。这些剪切波速度估计值是通过使用超快超声扫描仪对软介质中剪切波的传播进行成像获得的。在这种情况下,单轴静态应力由于非线性效应会导致各向异性,并导致剪切波速度发生变化。然后在基于琼脂 - 明胶的体模和基于聚乙烯醇的体模中测量三阶弹性模量(A)。