Zhou Huan-Ping, Zhang Ya-Wen, Mai Hao-Xin, Sun Xiao, Liu Qiang, Song Wei-Guo, Yan Chun-Hua
Beijing National Laboratory for Molecular Sciences, State Key Laboratory of Rare Earth Materials Chemistry and Applications, PKU-HKU Joint Laboratory in Rare Earth Materials and Bioinorganic Chemistry, Peking University, Beijing, China.
Chemistry. 2008;14(11):3380-90. doi: 10.1002/chem.200701348.
Uniform CeO(2) nanoflowers were synthesized by rapid thermolysis of (NH(4))(2)Ce(NO(3))(6) in oleic acid (OA)/oleylamine (OM), by a unique 3D oriented-attachment mechanism. CeO(2) nanoflowers with controlled shape (cubic, four-petaled, and starlike) and tunable size (10-40 nm) were obtained by adjusting the reaction conditions including solvent composition, precursor concentration, reaction temperature, and reaction time. The nanoflower growth mechanism was investigated by in situ electrical conductance measurements, transmission electron microscopy, and UV/Vis spectroscopy. The CeO(2) nanoflowers are likely formed in two major steps, that is, initial formation of ceria cluster particles capped with various ligands (e.g., OA, OM, and NO(3) (-)) via hydrolysis of (NH(4))(2)Ce(NO(3))(6) at temperatures in the range 140-220 degrees C, and subsequent spontaneous organization of the primary particles into nanoflowers by 3D oriented attachment, due to a rapid decrease in surface ligand coverage caused by sudden decomposition of the precursor at temperatures above 220 degrees C in a strong redox reaction. After calcination at 400 degrees C for 4 h the 33.8 nm CeO(2) nanoflowers have a specific surface area as large as 156 m(2) g(-1) with high porosity, and they are highly active for conversion of CO to CO(2) in the low temperature range of 200-400 degrees C. The present approach has also been extended to the preparation of other transition metal oxide (CoO, NiO, and CuO(x)) nanoflowers.
通过在油酸(OA)/油胺(OM)中对(NH₄)₂Ce(NO₃)₆进行快速热解,利用独特的三维定向附着机制合成了均匀的CeO₂纳米花。通过调整反应条件,包括溶剂组成、前驱体浓度、反应温度和反应时间,获得了形状可控(立方、四瓣和星形)且尺寸可调(10 - 40 nm)的CeO₂纳米花。通过原位电导率测量、透射电子显微镜和紫外/可见光谱研究了纳米花的生长机制。CeO₂纳米花可能通过两个主要步骤形成,即在140 - 220℃温度下,(NH₄)₂Ce(NO₃)₆水解形成包覆有各种配体(如OA、OM和NO₃⁻)的氧化铈簇颗粒,随后由于前驱体在220℃以上温度下的突然分解导致表面配体覆盖率迅速降低,在强烈的氧化还原反应中,初级颗粒通过三维定向附着自发组织成纳米花。在400℃煅烧4小时后,33.8 nm的CeO₂纳米花具有高达156 m² g⁻¹的比表面积和高孔隙率,并且在200 - 400℃的低温范围内对CO转化为CO₂具有高活性。本方法还已扩展到制备其他过渡金属氧化物(CoO、NiO和CuO(x))纳米花。