Sanchez-Sotelo Joaquin, Torchia Michael E, O'Driscoll Shawn W
Department of Orthopedic Surgery, Mayo Clinic, 200 First Street S.W., Medical Sciences Building 3-69, Rochester, MN 55905, USA.
J Bone Joint Surg Am. 2008 Mar;90 Suppl 2 Pt 1:31-46. doi: 10.2106/JBJS.G.01502.
Severe comminution, bone loss, and osteopenia at the site of a distal humeral fracture increase the risk of an unsatisfactory result, often secondary to inadequate fixation. The purpose of this study was to determine the outcome of treating these fractures with a principle-based technique that maximizes fixation in the articular fragments and stability at the supracondylar level.
Thirty-four consecutive complex distal humeral fractures were fixed with two parallel plates applied (medially and laterally) in approximately the sagittal plane. The technique was specifically designed to satisfy two principles: (1) fixation in the distal fragments should be maximized and (2) screw fixation in the distal segment should contribute to stability at the supracondylar level. Twenty-six fractures were AO type C3, and fourteen were open. Thirty-two fractures were followed for a mean of two years. The patients were assessed clinically with use of the Mayo Elbow Performance Score (MEPS) and radiographically.
Neither hardware failure nor fracture displacement occurred in any patient. Union of thirty-one of the thirty-two fractures was achieved primarily. Five patients underwent additional surgery to treat elbow stiffness. There was one deep infection that resolved without hardware removal and did not impede union. At the time of the most recent follow-up, twenty-eight elbows were either not painful or only mildly painful, and the mean flexion-extension arc was 99 degrees . The mean MEPS was 85 points. The result was graded as excellent for eleven elbows, good for sixteen, fair for two, and poor for three.
Stable fixation and a high rate of union of complex distal humeral fractures can be achieved when a principle-based surgical technique that maximizes fixation in the distal segments and stability at the supracondylar level is employed. The early stability achieved with this technique permits intensive rehabilitation to restore elbow motion.
肱骨远端骨折部位的严重粉碎、骨质丢失和骨质减少会增加治疗效果不佳的风险,这通常是由于固定不充分所致。本研究的目的是确定采用一种基于原则的技术治疗这些骨折的效果,该技术可使关节内骨折块的固定最大化,并使髁上水平的稳定性最大化。
对34例连续性复杂肱骨远端骨折采用在矢状面大致平行放置两块钢板(内侧和外侧)进行固定。该技术专门设计以满足两条原则:(1)应使远端骨折块的固定最大化;(2)远端节段的螺钉固定应有助于髁上水平的稳定性。26例骨折为AO C3型,14例为开放性骨折。32例骨折平均随访2年。采用梅奥肘关节功能评分(MEPS)对患者进行临床评估,并进行影像学检查。
所有患者均未发生内固定失败或骨折移位。32例骨折中有31例主要达到骨愈合。5例患者接受了额外手术以治疗肘关节僵硬。发生1例深部感染,经治疗感染消退,未取出内固定,且未影响骨愈合。在最近一次随访时,28例肘关节无痛或仅轻度疼痛,平均屈伸弧为99度。平均MEPS为85分。结果评为优的肘关节有11例,良16例,可2例,差3例。
采用一种基于原则的手术技术,使远端节段的固定最大化并使髁上水平的稳定性最大化时,可实现复杂肱骨远端骨折的稳定固定和高骨愈合率。该技术实现的早期稳定性允许进行强化康复以恢复肘关节活动度。