Soonthornnonda Puripus, Christensen Erik R
Department of Civil Engineering and Mechanics, University of Wisconsin-Milwaukee, 53210, USA.
Water Environ Res. 2008 Feb;80(2):162-71. doi: 10.2175/106143007x220888.
A load model for stormwater constituents is proposed that describes mass retained on the drainage area after previous storms, as a function of a weighted sum of previous antecedent dry periods. It was used to compute the event load for 14 constituents--zinc, copper, cadmium, nickel, chromium, lead, mercury, silver, total suspended solids (TSS), E. coli, fecal coliform, total soluble phosphorus, total phosphorus, and 5-day biochemical oxygen demand. The results show acceptable fits for most constituents based on over 400 rain events (2000 to 2004) in Milwaukee, Wisconsin. Considering the retained pollutant mass after one previous storm rather than assuming the area to be clean after the previous storm gives more accurate results for all constituents, except TSS and silver. The model can be used for mixed land-use areas. The ratios of deposition fluxes of zinc and individual metals were determined at a major parking lot producing a profile characteristic of automobile emissions.
