Daria V R, Saloma C, Kawata S
National Institute of Physics, University of the Philippines, Diliman, Quezon City 1101, Philippines.
Appl Opt. 2000 Oct 1;39(28):5244-55. doi: 10.1364/ao.39.005244.
To gain a better understanding of the spatiotemporal problems that are encountered in two-photon excitation fluorescence imaging through highly scattering media, we investigate how diffraction affects the three-dimensional intensity distribution of a focused, pulsed optical beam propagating inside a scattering medium. In practice, the full potential of the two-photon excitation fluorescence imaging is unrealized at long scattering depths, owing to the unwanted temporal and spatial broadening of the femtosecond excitation light pulse that reduces the energy density at the geometric focus while it increases the excitation energy density in the out-of-focus regions. To analyze the excitation intensity distribution, we modify the Monte Carlo-based photon-transport model to a semi-quantum-mechanical representation that combines the wave properties of light with the particle behavior of the propagating photons. In our model the propagating photon is represented by a plane wave with its propagation direction in the scattering medium determined by the Monte Carlo technique. The intensity distribution in the focal region is given by the square of the linear superposition of the various plane waves that arrive at different incident angles and optical path lengths. In the absence of scattering, the propagation model yields the intensity distribution that is predicted by the Huygens-Fresnel principle. We quantify the decrease of the energy density delivered at the geometric focus as a function of the optical depth to the mean-free-path ratio that yields the average number of scattering events that a photon encounters as it propagates toward the focus. Both isotropic and anisotropic scattering media are considered. Three values for the numerical aperture (NA) of the focusing lens are considered: NA = 0.25, 0.5, 0.75.
为了更好地理解在通过高散射介质进行双光子激发荧光成像时遇到的时空问题,我们研究了衍射如何影响在散射介质中传播的聚焦脉冲光束的三维强度分布。在实际应用中,由于飞秒激发光脉冲出现不必要的时间和空间展宽,使得双光子激发荧光成像在长散射深度下的全部潜力无法实现。这种展宽降低了几何焦点处的能量密度,同时增加了离焦区域的激发能量密度。为了分析激发强度分布,我们将基于蒙特卡罗的光子传输模型修改为一种半量子力学表示,该表示将光的波动特性与传播光子的粒子行为相结合。在我们的模型中,传播的光子由平面波表示,其在散射介质中的传播方向由蒙特卡罗技术确定。焦点区域的强度分布由到达不同入射角和光程长度的各种平面波的线性叠加的平方给出。在没有散射的情况下,传播模型得出的强度分布是由惠更斯 - 菲涅耳原理预测的。我们将几何焦点处传递的能量密度的降低量化为光学深度与平均自由程之比的函数,该比值给出了光子向焦点传播时遇到的平均散射事件数。同时考虑了各向同性和各向异性散射介质。考虑了聚焦透镜的三个数值孔径(NA)值:NA = 0.25、0.5、0.75。