Noya Eva G, Vega Carlos, de Miguel Enrique
Departamento de Química-Física, Facultad de Ciencias Químicas, Universidad Complutense de Madrid, Madrid, Spain.
J Chem Phys. 2008 Apr 21;128(15):154507. doi: 10.1063/1.2901172.
We consider the computation of the coexistence pressure of the liquid-solid transition of a system of hard spheres from direct simulation of the inhomogeneous system formed from liquid and solid phases separated by an interface. Monte Carlo simulations of the interfacial system are performed in three different ensembles. In a first approach, a series of simulations is carried out in the isothermal-isobaric ensemble, where the solid is allowed to relax to its equilibrium crystalline structure, thus avoiding the appearance of artificial stress in the system. Here, the total volume of the system fluctuates due to changes in the three dimensions of the simulation box. In a second approach, we consider simulations of the inhomogeneous system in an isothermal-isobaric ensemble where the normal pressure, as well as the area of the (planar) fluid-solid interface, are kept constant. Now, the total volume of the system fluctuates due to changes in the longitudinal dimension of the simulation box. In both approaches, the coexistence pressure is estimated by monitoring the evolution of the density along several simulations carried out at different pressures. Both routes are seen to provide consistent values of the fluid-solid coexistence pressure, p=11.54(4)k(B)T/sigma(3), which indicates that the error introduced by the use of the standard constant-pressure ensemble for this particular problem is small, provided the systems are sufficiently large. An additional simulation of the interfacial system is conducted in a canonical ensemble where the dimensions of the simulation box are allowed to change subject to the constraint that the total volume is kept fixed. In this approach, the coexistence pressure corresponds to the normal component of the pressure tensor, which can be computed as an appropriate ensemble average in a single simulation. This route yields a value of p=11.54(4)k(B)T/sigma(3). We conclude that the results obtained for the coexistence pressure from direct simulations of the liquid and solid phases in coexistence using different ensembles are mutually consistent and are in excellent agreement with the values obtained from free energy calculations.
我们考虑通过对由界面分隔的液相和固相形成的非均匀系统进行直接模拟,来计算硬球系统液 - 固转变的共存压力。在三种不同的系综中对界面系统进行蒙特卡罗模拟。第一种方法是在等温 - 等压系综中进行一系列模拟,在此过程中固体可弛豫至其平衡晶体结构,从而避免系统中出现人为应力。在此,系统的总体积会因模拟盒三维尺寸的变化而波动。第二种方法是考虑在等温 - 等压系综中对非均匀系统进行模拟,其中法向压力以及(平面)流 - 固界面的面积保持恒定。此时,系统的总体积会因模拟盒纵向尺寸的变化而波动。在这两种方法中,通过监测在不同压力下进行的多次模拟中密度的演变来估算共存压力。可以看出,这两种途径都能提供一致的流 - 固共存压力值,即(p = 11.54(4)k_BT / \sigma^3),这表明对于这个特定问题,使用标准恒压系综引入的误差较小,前提是系统足够大。在正则系综中对界面系统进行了额外的模拟,其中模拟盒的尺寸在总体积保持固定的约束下允许变化。在这种方法中,共存压力对应于压力张量的法向分量,它可以在单次模拟中作为适当的系综平均值来计算。此途径得出的(p)值为(11.54(4)k_BT / \sigma^3)。我们得出结论,使用不同系综对共存的液相和固相进行直接模拟所获得的共存压力结果相互一致,并且与从自由能计算中获得的值高度吻合。