Hunyady Agnes I, Pieters Benjamin, Johnston Troy A, Jonmarker Christer
Department of Anesthesiology, Eastern Maine Medical Center, Bangor, Maine, USA.
Anesthesiology. 2008 Jun;108(6):1004-8. doi: 10.1097/ALN.0b013e3181730288.
Knowledge of normal front teeth-to-carina distance (FT-C) might prevent accidental bronchial intubation. The aim of the current study was to measure FT-C and to examine whether the Morgan formula for oral intubation depth, i.e., endotracheal tube (ETT) position at front teeth (cm) = 0.10 x height (cm) + 5, gives appropriate guidance when intubating children of different ages.
FT-C was measured in 170 infants and children, aged 1 day to 19 yr, undergoing cardiac catheterization. FT-C was obtained as the sum of the ETT length at the upper front teeth/dental ridge and the distance from the ETT tip to the carina. The latter measure was taken from an anterior-posterior chest x-ray.
There was close linear correlation between FT-C and height: FT-C (cm) = 0.12 x height (cm) + 5.2, R = 0.98. The linear correlation coefficients (R) for FT-C versus weight and age were 0.78 and 0.91, respectively. If the Morgan formula had been used for intubation, the ETT tip would have been at 90 +/- 4% of FT-C. No patient would have been bronchially intubated, but the ETT tip would have been less than 0.5 cm from the carina in 13 infants.
FT-C can be well predicted from the height/length of the child. The Morgan formula provides good guidance for intubation in children but can result in a distal ETT tip position in small infants. Careful auscultation is necessary to ensure correct tube position.
了解正常的门牙至隆突距离(FT-C)可能有助于防止意外支气管插管。本研究的目的是测量FT-C,并检验摩根口腔插管深度公式,即门牙处气管导管(ETT)位置(cm)=0.10×身高(cm)+5,在为不同年龄儿童插管时是否能提供适当指导。
对170例年龄在1天至19岁接受心导管检查的婴幼儿和儿童测量FT-C。FT-C通过上排门牙/牙槽嵴处ETT长度与ETT尖端至隆突的距离之和获得。后者通过胸部前后位X线片测量。
FT-C与身高之间存在密切的线性相关性:FT-C(cm)=0.12×身高(cm)+5.2,R=0.98。FT-C与体重和年龄的线性相关系数(R)分别为0.78和0.91。如果使用摩根公式进行插管,ETT尖端将位于FT-C的90±4%处。不会有患者发生支气管插管,但在13例婴儿中,ETT尖端距隆突将小于0.5 cm。
FT-C可根据儿童的身高/长度进行良好预测。摩根公式为儿童插管提供了良好指导,但可能导致小婴儿的ETT尖端位置过深。需要仔细听诊以确保导管位置正确。