Suppr超能文献

一种用于前列腺植入物中锥束CT与超声图像融合的双模态体模。

A dual modality phantom for cone beam CT and ultrasound image fusion in prostate implant.

作者信息

Ng Angela, Beiki-Ardakan Akbar, Tong Shidong, Moseley Douglas, Siewerdsen Jeffrey, Jaffray David, Yeung Ivan W T

机构信息

Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9, Canada.

出版信息

Med Phys. 2008 May;35(5):2062-71. doi: 10.1118/1.2898189.

Abstract

In transrectal ultrasound (TRUS) guided prostate seed brachytherapy, TRUS provides good delineation of the prostate while x-ray imaging, e.g., C-arm, gives excellent contrast for seed localization. With the recent availability of cone beam CT (CBCT) technology, the combination of the two imaging modalities may provide an ideal system for intraoperative dosimetric feedback during implantation. A dual modality phantom made of acrylic and copper wire was designed to measure the accuracy and precision of image coregistration between a C-arm based CBCT and 3D TRUS. The phantom was scanned with TRUS and CBCT under the same setup condition. Successive parallel transverse ultrasound (US) images were acquired through manual stepping of the US probe across the phantom at an increment of 1 mm over 7.5 cm. The CBCT imaging was done with three reconstructed slice thicknesses (0.4, 0.8, and 1.6 mm) as well as at three different tilt angles (0 degrees, 15 degrees, 30 degrees), and the coregistration between CBCT and US images was done using the Variseed system based on four fiducial markers. Fiducial localization error (FLE), fiducial registration error (FRE), and target registration error (TRE) were calculated for all registered image sets. Results showed that FLE were typically less than 0.4 mm, FRE were less than 0.5 mm, and TRE were typically less than 1 mm within the range of operation for prostate implant (i.e., < 6 cm to surface of US probe). An analysis of variance test showed no significant difference in TRE for the CBCT-US fusion among the three slice thicknesses (p = 0.37). As a comparison, the experiment was repeated with a US-conventional CT scanner combination. No significant difference in TRE was noted between the US-conventional CT fusion and that for all three CBCT image slice thicknesses (p = 0.21). CBCT imaging was also performed at three different C-arm tilt angles of 0 degrees, 15 degrees and 30 degrees and reconstructed at a slice thickness of 0.8 mm. There is no significant difference in TRE between 0 degrees and 15 degrees (p = 0.191) as well as between 0 degrees and 30 degrees (p = 0.275), which suggests that the C-arm may be tilted intraoperatively to acquire CBCT images without compromising the quality of image fusion. The results conclude a high degree of accuracy and precision for the CBCT-TRUS fusion, which could be useful toward achieving real time intraoperative dosimetry in prostate brachytherapy.

摘要

在经直肠超声(TRUS)引导的前列腺籽源近距离放射治疗中,TRUS能很好地勾勒出前列腺轮廓,而X射线成像,如C形臂,在籽源定位方面能提供出色的对比度。随着锥形束CT(CBCT)技术的近期问世,这两种成像方式的结合可能为植入过程中的术中剂量反馈提供一个理想系统。设计了一种由丙烯酸和铜线制成的双模态体模,用于测量基于C形臂的CBCT与三维TRUS之间图像配准的准确性和精确性。在相同设置条件下,用TRUS和CBCT对体模进行扫描。通过手动逐步移动超声探头,以1毫米的增量穿过体模,在7.5厘米范围内采集连续的平行横向超声(US)图像。CBCT成像采用三种重建切片厚度(0.4、0.8和1.6毫米)以及三种不同倾斜角度(0度、15度、30度)进行,CBCT与US图像之间的配准使用基于四个基准标记的Variseed系统。对所有配准图像集计算基准定位误差(FLE)、基准配准误差(FRE)和目标配准误差(TRE)。结果表明,在前列腺植入的操作范围内(即距超声探头表面<6厘米),FLE通常小于0.4毫米,FRE小于0.5毫米,TRE通常小于1毫米。方差分析测试表明,三种切片厚度的CBCT-US融合在TRE方面无显著差异(p = 0.37)。作为比较,用US-传统CT扫描仪组合重复该实验。US-传统CT融合与所有三种CBCT图像切片厚度的融合在TRE方面无显著差异(p = 0.2*此处原文有误,应为0.21)。还在0度、15度和30度这三种不同的C形臂倾斜角度下进行CBCT成像,并以0.8毫米的切片厚度重建。0度和15度之间(p = 0.191)以及0度和30度之间(p = 0.275)的TRE无显著差异,这表明术中C形臂可以倾斜以获取CBCT图像,而不会影响图像融合质量。结果表明CBCT-TRUS融合具有高度的准确性和精确性,这对于在前列腺近距离放射治疗中实现实时术中剂量测定可能是有用的。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验