Department of Microbiology, Biological Laboratory, Vrije Universiteit, P.O. Box 7161, 1007 MC Amsterdam, The Netherlands.
Biotechnol Bioeng. 1988 Sep 5;32(6):803-12. doi: 10.1002/bit.260320612.
Substrate and energy costs of the production of exocellular enzymes from glucose and citrate by B. Iicheniformis S1684 as well as molar growth yields corrected for these costs of product formation were calculated using data from chemostat experiments. The calculations showed that 1.46-1.73 mol glucose and 2.31-2.77 mol citrate are needed for formation and excretion of 1 mol protein. Consequently, the values of the maximal product yield from substrate (Y(psm') g/mol) are 80 < Y(psm) < 95 when product is formed from glucose and 50 < Y(psm) < 60 when product is formed from citrate. The higher substrate costs for product formation from citrate are due to a higher level of CO(2) production during protein formation and a higher substrate requirement for the energy supply of product formation and excretion than when product is formed from glucose. The theoretical ATP requirement for protein synthesis could be determined reasonably well, but the energy costs of protein excretion could not be determined exactly. The energy costs of protein formation are higher than those of biomass formation or protein excretion. Molar growth yields corrected for the substrate costs of product formation were high, indicating a high efficiency of growth.Growth and production parameters were determined as well from experimental data of recycling fermentor experiments using a parameter optimization procedure based on a mathematical model describing biomass growth as a linear function of the substrate consumption rate and the rate of product formation as a linear function of biomass growth rate. The fitting procedure yielded two growth and production domains during glucose limitation. In the first domain the values for the maximal growth yield and maintenance coefficient were in agreement with those found in chemostat experiments at corresponding values of Y(spm). Domain 2 could be described best with linear growth and product formation. In domain 2 the rate of product formation decreased and more substrate became available for biomass formation. As a consequence the specific growth rate increased in the shift from domain 1 to 2. Domain 2 behavior most probably is caused by the rel-status of B. Iicheniformis S1684.
利用恒化器实验的数据,计算了地衣芽孢杆菌 S1684 利用葡萄糖和柠檬酸盐生产胞外酶的基质和能量成本,以及为产物形成成本校正后的摩尔生长产率。计算表明,形成和分泌 1mol 蛋白质需要 1.46-1.73mol 葡萄糖和 2.31-2.77mol 柠檬酸盐。因此,当产物由葡萄糖形成时,最大产物得率(Y(psm')g/mol)的数值为 80<Y(psm)<95,而当产物由柠檬酸盐形成时,该数值为 50<Y(psm)<60。由于在蛋白质形成过程中产生了更高水平的 CO2,以及形成和分泌产物所需的基质比葡萄糖高,因此,与葡萄糖相比,由柠檬酸盐形成产物的基质成本更高。可以合理地确定用于蛋白质合成的理论 ATP 需求,但无法准确确定蛋白质分泌的能量成本。蛋白质形成的能量成本高于生物量形成或蛋白质分泌的能量成本。为产物形成的基质成本校正后的摩尔生长产率较高,表明生长效率较高。同样,从基于描述生物量生长与基质消耗速率呈线性关系、产物形成速率与生物量生长速率呈线性关系的数学模型的实验数据,通过参数优化程序确定了生长和生产参数。拟合过程在葡萄糖限制下产生了两个生长和生产域。在第一个域中,最大生长产率和维持系数的值与恒化器实验中在相应 Y(spm)值下的值一致。第二域可以用线性生长和产物形成来最好地描述。在第二域中,产物形成速率降低,更多的基质可用于生物量形成。因此,从域 1 到域 2 的转变会导致比生长速率增加。第二域行为很可能是由于地衣芽孢杆菌 S1684 的 rel-状态引起的。