Badaire Stéphane, Cottin-Bizonne Cécile, Stroock Abraham D
School of Chemical and Biomolecular Engineering, Cornell University, Ithaca, New York 14853, USA.
Langmuir. 2008 Oct 21;24(20):11451-63. doi: 10.1021/la801718j. Epub 2008 Sep 13.
Photolithography can be used to form monodisperse colloids of well-defined, nonspherical shape in a negative photoresist, SU-8. In aqueous suspension, in the presence of dextran as a depletant, we showed previously that the aggregation of these particles was highly selective for the end-to-end configuration: cylinders assembled into linear aggregates that could extend to lengths of tens of units without significant lateral aggregation. This article presents an in-depth study of the mechanisms by which these particles aggregate. In particular, we focus on the roles of global shape, roughness, and adsorbed layers of surfactants in mediating depletion, van der Waals (vdW), and electrostatic interactions between these particles. We describe in detail the fabrication and characterization of the particles. To allow for the interpretations of the experiments, we present predictions for the interactions between mathematically ideal cylinders with smooth surfaces, and a statistical thermodynamic model for the linear assemblies. We present experimental observations of the state of aggregation as a function of concentration of dextran and ionic strength for typical particles that present roughness of larger amplitude on their rounded side walls than on their flat ends. We compare this behavior to that of particles that lack this contrast in roughness; this comparison indicates that roughness can serve to attenuate strongly the attractive depletion interactions. To achieve a more quantitative measure of this effect, we analyze size distributions of linear aggregates to calculate the energies of the end-to-end "bonds" on the basis of our statistical model. We find that both the depletion and vdW interactions are attenuated approximately 20 fold relative to predictions for smooth surfaces. We conclude with an assessment of outstanding questions and opportunities to exploit shape and roughness to direct the self-assembly of colloids.
光刻技术可用于在负性光刻胶SU-8中形成形状明确、非球形的单分散胶体。在水悬浮液中,以葡聚糖作为耗尽剂,我们之前表明这些颗粒的聚集对于端对端构型具有高度选择性:圆柱体组装成线性聚集体,其长度可延伸至数十个单元,而不会发生明显的横向聚集。本文对这些颗粒聚集的机制进行了深入研究。特别地,我们关注整体形状、粗糙度以及表面活性剂吸附层在介导这些颗粒之间的耗尽、范德华(vdW)和静电相互作用中的作用。我们详细描述了颗粒的制备和表征。为了便于对实验进行解释,我们给出了具有光滑表面的数学理想圆柱体之间相互作用的预测,以及线性组装体的统计热力学模型。我们给出了典型颗粒聚集状态随葡聚糖浓度和离子强度变化的实验观察结果,这些颗粒在其圆形侧壁上的粗糙度比在其平端上的粗糙度大。我们将这种行为与粗糙度无此差异的颗粒的行为进行比较;这种比较表明粗糙度可强烈减弱吸引性的耗尽相互作用。为了对这种效应进行更定量的测量,我们根据我们的统计模型分析线性聚集体的尺寸分布,以计算端对端“键”的能量。我们发现,相对于光滑表面的预测,耗尽相互作用和范德华相互作用都减弱了约20倍。我们最后评估了悬而未决的问题以及利用形状和粗糙度来指导胶体自组装的机会。