Suppr超能文献

中国镇江不同区域道路沉积物的粒径分布与污染物

Particle size distribution and pollutants in road-deposited sediments in different areas of Zhenjiang, China.

作者信息

Bian Bo, Zhu Wei

机构信息

Jiangsu Academy of Environmental Science, Nanjing 210098, People's Republic of China.

出版信息

Environ Geochem Health. 2009 Aug;31(4):511-20. doi: 10.1007/s10653-008-9203-8. Epub 2008 Sep 13.

Abstract

An understanding of road-deposited sediment (RDS) characteristics on an impervious surface is essential to estimate pollutant washoff characteristics and to minimise the impacts of pollutants on the water environment. A total of 62 RDS samples were collected from four different land-use types (commercial, residential, intense traffic and riverside park) in Zhenjiang City, China. The samples were fractionated into seven grain-size classes and analysed for particle size distribution and concentrations of pollutants. The samples are found to consist predominantly of fine particles (60-80%, <250 microm). The maximum mean concentrations of zinc, lead and copper were 686.93, 589.19 and 158.16 mg/kg, respectively, with the highest metal concentrations found in samples from the intense traffic area. The maximum mean contents of organic matter (12.55%), nitrogen (6.31 mg/g) and phosphorus (5.15 mg/g) were found in samples from the commercial area. The concentrations of heavy metals were highest in the smallest particle size fraction analysed (63 microm). The organic matter and nitrogen content generally increased with decreasing particle sizes in the <500-microm particle size range. The results also revealed that most of the total nitrogen (TN) is attached to the finer sediments and that to effectively reduce TN loads in particulates, treatment facilities must be able to remove the finer particles (down to 125 microm for TN).

摘要

了解不透水表面上的道路沉积物(RDS)特征对于估算污染物冲刷特征以及将污染物对水环境的影响降至最低至关重要。在中国镇江市,从四种不同土地利用类型(商业、住宅、交通繁忙区和滨江公园)共采集了62个RDS样本。这些样本被分为七个粒度等级,并分析了粒径分布和污染物浓度。结果发现,样本主要由细颗粒组成(60 - 80%,<250微米)。锌、铅和铜的最大平均浓度分别为686.93、589.19和158.16毫克/千克,其中交通繁忙区样本中的金属浓度最高。商业区样本中的有机质(12.55%)、氮(6.31毫克/克)和磷(5.15毫克/克)的平均含量最高。在分析的最小粒径级分(63微米)中,重金属浓度最高。在<500微米粒径范围内,有机质和氮含量通常随着粒径减小而增加。结果还表明,大部分总氮(TN)附着在较细的沉积物上,要有效降低颗粒物中的TN负荷,处理设施必须能够去除较细的颗粒(对于TN,低至125微米)。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验