Tian Ze-An, Liu Rang-Su, Zheng Cai-Xing, Liu Hai-Rong, Hou Zhao-Yang, Peng Ping
School of Physics and Microelectronic Science, Hunan University, Changsha 410082, China.
J Phys Chem A. 2008 Dec 4;112(48):12326-36. doi: 10.1021/jp804836b.
On the basis of the quantum Sutton-Chen potential, the rapid solidification processes of liquid silver have been studied by molecular dynamics simulation for four cooling rates. By means of several analysis methods, the competitions and transitions between microstructures during the cooling processes have been analyzed intensively. It is found that there are two phase transitions in all simulation processes. The first one is from liquid state to metastable (transitional) body-centered cubic (bcc) phase. The initial crystallization temperature T(ic) increases with the decrease of the cooling rate. The second one is from the transitional bcc phase to the final solid phase. This study validates the Ostwald's step rule and provides evidence for the prediction that the metastable bcc phase forms first from liquid. Further analyses reveal that the final solid at 273 K can be a mixture of hexagonal close-packed (hcp) and face-centered cubic (fcc) microstructures with various proportions of the two, and the slower the cooling rate is, the higher proportion the fcc structure occupies.
基于量子Sutton-Chen势,采用分子动力学模拟研究了液态银在四种冷却速率下的快速凝固过程。通过多种分析方法,深入分析了冷却过程中微观结构之间的竞争与转变。研究发现,在所有模拟过程中都存在两个相变。第一个相变是从液态转变为亚稳(过渡)体心立方(bcc)相。初始结晶温度T(ic)随冷却速率的降低而升高。第二个相变是从过渡bcc相转变为最终固相。本研究验证了奥斯特瓦尔德步阶规则,并为液态首先形成亚稳bcc相的预测提供了证据。进一步分析表明,273K时的最终固相可能是六方密排(hcp)和面心立方(fcc)微观结构的混合物,且两种结构的比例各不相同,冷却速率越慢,fcc结构所占比例越高。