Terao Jun, Kambe Nobuaki
Department of Applied Chemistry, Graduate School of Engineering, Osaka University, Yamadaoka 2-1, Suita, Osaka, Japan.
Acc Chem Res. 2008 Nov 18;41(11):1545-54. doi: 10.1021/ar800138a.
Transition metal-catalyzed cross-coupling reactions of organic halides and pseudo-halides containing a C-X bond (X = I, Br, Cl, OTf, OTs, etc.) with organometallic reagents are among the most important transformations for carbon-carbon bond formation between a variety of sp, sp(2), and sp(3)-hybridized carbon atoms. In particular, researchers have widely employed Ni- and Pd-catalyzed cross-coupling to synthesize complex organic structures from readily available components. The catalytic cycle of this process comprises oxidative addition, transmetalation, and reductive elimination steps. In these reactions, various organometallic reagents could bear a variety of R groups (alkyl, vinyl, aryl, or allyl), but the coupling partner has been primarily limited to sp and sp(2) carbon compounds: alkynes, alkenes, and arenes. With alkyl coupling partners, these reactions typically run into two problems within the catalytic cycle. First, oxidative addition of alkyl halides to a metal catalyst is generally less efficient than that of aryl or alkenyl compounds. Second, the alkylmetal intermediates formed tend to undergo intramolecular beta-hydrogen elimination. In this Account, we describe our efforts to overcome these problems for Ni and Pd chemistry. We have developed new catalytic systems that do not involve M(0) species but proceed via an anionic complex as the key intermediate. For example, we developed a unique cross-coupling reaction of alkyl halides with organomagnesium or organozinc reagents catalyzed by using a 1,3-butadiene as the additive. This reaction follows a new catalytic pathway: the Ni or Pd catalyst reacts first with R-MgX to form an anionic complex, which then reacts with alkyl halides. Bis-dienes were also effective additives for the Ni-catalyzed cross-coupling reaction of organozinc reagents with alkyl halides. This catalytic system tolerates a wide variety of functional groups, including nitriles, ketones, amides, and esters. In addition, we have extended the utility of Cu-catalyzed cross-coupling reactions. With 1-phenylpropyne as an additive, Cu-catalyzed reactions of alkyl chlorides, fluorides, and mesylates with Grignard reagents proceed efficiently. These new catalytic reactions use pi-carbon ligands such as pi-allyl units or alkynes instead of heteroatom ligands such as phosphines or amines. Overall, these reactions provide new methodology for introducing alkyl moieties into organic molecules.
含有碳 - 卤键(X = I、Br、Cl、OTf、OTs等)的有机卤化物和拟卤化物与有机金属试剂之间的过渡金属催化交叉偶联反应,是在各种sp、sp(2)和sp(3)杂化碳原子之间形成碳 - 碳键的最重要转化反应之一。特别是,研究人员广泛采用镍和钯催化的交叉偶联反应,以从易得的组分合成复杂的有机结构。该过程的催化循环包括氧化加成、转金属化和还原消除步骤。在这些反应中,各种有机金属试剂可以带有各种R基团(烷基、乙烯基、芳基或烯丙基),但偶联伙伴主要限于sp和sp(2)碳化合物:炔烃、烯烃和芳烃。对于烷基偶联伙伴,这些反应在催化循环中通常会遇到两个问题。首先,烷基卤化物向金属催化剂的氧化加成通常不如芳基或烯基化合物有效。其次,形成的烷基金属中间体倾向于发生分子内β - 氢消除。在本综述中,我们描述了我们为克服镍和钯化学中的这些问题所做的努力。我们开发了新的催化体系,该体系不涉及M(0)物种,而是通过阴离子配合物作为关键中间体进行反应。例如,我们开发了一种独特的烷基卤化物与有机镁或有机锌试剂的交叉偶联反应,该反应以1,3 - 丁二烯作为添加剂进行催化。此反应遵循一条新的催化途径:镍或钯催化剂首先与R - MgX反应形成阴离子配合物,然后该阴离子配合物再与烷基卤化物反应。双二烯也是镍催化的有机锌试剂与烷基卤化物交叉偶联反应的有效添加剂。这种催化体系能耐受多种官能团,包括腈、酮、酰胺和酯。此外,我们扩展了铜催化交叉偶联反应的应用范围。以1 - 苯基丙炔作为添加剂,铜催化的烷基氯化物、氟化物和甲磺酸盐与格氏试剂的反应能高效进行。这些新的催化反应使用π - 碳配体,如π - 烯丙基单元或炔烃,而不是膦或胺等杂原子配体。总体而言,这些反应为将烷基部分引入有机分子提供了新的方法。