Gunasekaran Sengottuvelu, Kallarakkal Jain T, Thanikachalam S
Department of Cardiology, Sri Ramachandra Medical College and Research Institute, Chennai.
Indian Heart J. 2006 Jul-Aug;58(4):365-7.
Though the radial artery is an ideal site of access for coronary interventions, at times anatomical variations make this procedure complicated. We describe one such arterial aberrancy, the retroesophageal right subclavian artery or arteria lusoria, in which the right subclavian artery arises distal to the left subclavian artery. Therefore, approaching through the right radial artery, the catheter has to take a zigzag course through the right subclavian to the descending aorta, and then to the ascending aorta. This often makes it difficult to perform diagnostic angiography. Performing angioplasty by the right transradial approach also becomes a more difficult task and requires greater perseverance and skill. In the case described here, the patient with arteria lusoria had tandem 90% stenosis involving the proximal and mid left anterior descending artery. Percutaneous transluminal coronary angioplasty with stenting of the proximal and mid left anterior descending artery by the right transradial approach was performed, negotiating the loop with two paclitaxel-eluting stents.
尽管桡动脉是冠状动脉介入治疗的理想穿刺部位,但有时解剖变异会使该操作变得复杂。我们描述了一种这样的动脉异常,即食管后右锁骨下动脉或迷走动脉,其中右锁骨下动脉起源于左锁骨下动脉的远端。因此,经右桡动脉穿刺时,导管必须呈之字形路径穿过右锁骨下动脉到达降主动脉,然后再到升主动脉。这常常使得进行诊断性血管造影变得困难。经右桡动脉途径进行血管成形术也成为一项更具挑战性的任务,需要更大的毅力和技巧。在此描述的病例中,患有迷走动脉的患者左前降支近端和中段串联存在90%的狭窄。通过右桡动脉途径对左前降支近端和中段进行经皮腔内冠状动脉成形术并置入支架,使用两个紫杉醇洗脱支架通过了这个弯曲部位。