Suppr超能文献

髋部保护器提供的力衰减取决于撞击速度、骨盆大小和软组织硬度。

The force attenuation provided by hip protectors depends on impact velocity, pelvic size, and soft tissue stiffness.

作者信息

Laing Andrew C, Robinovitch Stephen N

机构信息

Faculty of Applied Sciences, Injury Prevention and Mobility Laboratory, School of Kinesiology, Simon Fraser University, 8888 University Drive, Burnaby, BC, V5A 1S6, Canada.

出版信息

J Biomech Eng. 2008 Dec;130(6):061005. doi: 10.1115/1.2979867.

Abstract

Wearable hip protectors represent a promising strategy for preventing hip fractures. However, there is lack of agreement on biomechanical testing standards and subsequent uncertainty about the ability of hip protectors to attenuate impact force during a fall. To address this issue, we designed a fall impact simulator that incorporated a "biofidelic" surrogate pelvis, which matched the surface geometry and soft tissue stiffness measured in elderly women (n=15). We then used this system to measure the attenuation in peak femoral neck force provided by two commercially available soft shell protectors (Safehip Soft and Hipsaver) and one rigid shell protector (Safehip Classic). Finally, we examined how the force attenuation provided by each protector was influenced by systematic changes in fall severity (impact velocity), body size (pelvis size), and soft tissue stiffness. With the biofidelic pelvis, the force attenuation averaged over all impact velocities was 27% for Safehip Soft, 17% for Safehip Classic, and 19% for Hipsaver. However, the rank order of hip protectors (and especially the performance of Safehip Classic) varied with the test conditions. Safehip Classic attenuated force by 33% during a low velocity (1 ms) fall, but only by 8% for a high velocity (4 ms) fall. In the latter condition, improved attenuation was provided by the soft shell hip protectors (19% by Safehip Soft and 21% by Hipsaver). As soft tissue stiffness increased from softest to most rigid, the attenuation provided by Safehip Classic increased 2.9-fold (from 26% to 76%), while Safehip Soft increased 1.7-fold (from 36% to 60%) and Hipsaver increased 1.1-fold (from 36% to 38%). As pelvis size decreased from largest to smallest, the attenuation provided by Safehip Classic increased 8-fold, but for a high velocity fall and moderate tissue stiffness, never exceeded that provided by Safehip Soft and Hipsaver. Our results indicate that, under biofidelic testing conditions, the soft shell hip protectors we examined generally provided greater force attenuation (averaging up to 27%) than the hard shell protector. Measured values of force attenuation were highly sensitive to variations in impact velocity, pelvic size, and pelvic soft tissue stiffness. This indicates the need to develop international testing standards to guide market approval, the selection of protectors for clinical trials, and the design of improved hip protectors.

摘要

可穿戴式髋部保护器是预防髋部骨折的一种很有前景的策略。然而,生物力学测试标准尚未达成一致,因此对于髋部保护器在跌倒时衰减冲击力的能力存在不确定性。为了解决这个问题,我们设计了一种跌倒冲击模拟器,其中包含一个“生物逼真”的替代骨盆,该骨盆与老年女性(n = 15)测量的表面几何形状和软组织刚度相匹配。然后,我们使用该系统测量了两种市售软壳保护器(Safehip Soft和Hipsaver)和一种硬壳保护器(Safehip Classic)提供的股骨颈峰值力的衰减情况。最后,我们研究了每种保护器提供的力衰减如何受到跌倒严重程度(冲击速度)、身体尺寸(骨盆大小)和软组织刚度的系统变化的影响。使用生物逼真的骨盆,在所有冲击速度下平均的力衰减,Safehip Soft为27%,Safehip Classic为17%,Hipsaver为19%。然而,髋部保护器的排名顺序(特别是Safehip Classic的性能)随测试条件而变化。Safehip Classic在低速(1米/秒)跌倒时力衰减33%,但在高速(4米/秒)跌倒时仅为8%。在后一种情况下,软壳髋部保护器提供了更好的衰减效果(Safehip Soft为19%,Hipsaver为21%)。随着软组织刚度从最软增加到最硬,Safehip Classic提供的衰减增加了2.9倍(从26%增加到76%),Safehip Soft增加了1.7倍(从36%增加到60%),Hipsaver增加了1.1倍(从36%增加到38%)。随着骨盆尺寸从最大减小到最小,Safehip Classic提供的衰减增加了8倍,但对于高速跌倒和中等组织刚度,其衰减从未超过Safehip Soft和Hipsaver。我们的结果表明,在生物逼真的测试条件下,我们研究的软壳髋部保护器通常比硬壳保护器提供更大的力衰减(平均高达27%)。力衰减的测量值对冲击速度、骨盆大小和骨盆软组织刚度的变化高度敏感。这表明需要制定国际测试标准,以指导市场批准、选择用于临床试验的保护器以及设计改进的髋部保护器。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验