Jones N W, Hutchinson E S, Brownbill P, Crocker I P, Eccles D, Bugg G J, Raine-Fenning N J
Nottingham University Hospitals NHS Trust, Queens Medical Centre, Derby Road, Nottingham, NG7 2UH, UK.
Placenta. 2009 Feb;30(2):130-5. doi: 10.1016/j.placenta.2008.11.002. Epub 2008 Dec 6.
Flow phantoms have been used to investigate and quantify three-dimensional power Doppler data but this is the first study to use the in vitro, dual perfused, placental perfusion model. We used this model to investigate and quantify the effect of variation in fetal-side flow rates and attenuation on 3D power Doppler angiography. Perfusion of a placental lobule was commenced within 30 min of delivery and experimentation was successful in 8 of the 18 placenta obtained. Fetal and maternal perfusate was modified Earle's bicarbonate buffer which, following equilibration, was supplemented on the fetal side with whole heparinised cord blood. Imaging was performed with a Voluson-i ultrasound machine. A 'vascular biopsy' the thickness of the placental lobule was defined and signal quantified within using VOCAL (GE Medical Systems, Zipf, Austria). Three vascular indices are generated: vascularisation index (VI) defined as the percentage of power Doppler data within a volume of interest; flow index (FI), the mean signal intensity of the power Doppler information; and vascularisation flow index (VFI), a combination of both factors derived through their multiplication. Attenuation was investigated in this model with the addition of tissue mimic blocks. Our results showed a predictable relationship between flow rates and the vascular indices VI and VFI. However the FI was a less reliable predictor of flow; thus it should be interpreted with caution. The power Doppler signal was markedly affected by attenuation leading to a complete loss of information at a depth of 6 cm in the model used. In conclusion this model can be adapted to provide a phantom to analyse and quantify 3D power Doppler signals and demonstrates that vascular indices within a tissue remain related to volume flow. This model provides further evidence that depth dependent attenuation of signal needs to be accounted for in any in vivo work where the probe is not in direct contact with the tissue of interest.
血流模拟体已被用于研究和量化三维能量多普勒数据,但这是首次使用体外双灌注胎盘灌注模型的研究。我们使用该模型来研究和量化胎儿侧流速变化和衰减对三维能量多普勒血管造影的影响。在分娩后30分钟内开始对胎盘小叶进行灌注,在获得的18个胎盘中,有8个实验成功。胎儿和母体灌注液为改良的Earle氏碳酸氢盐缓冲液,平衡后,在胎儿侧补充全肝素化脐带血。使用Voluson-i超声仪进行成像。定义了胎盘小叶厚度的“血管活检”,并使用VOCAL(通用电气医疗系统公司,奥地利齐普夫)在其中对信号进行量化。生成了三个血管指数:血管化指数(VI),定义为感兴趣体积内能量多普勒数据的百分比;血流指数(FI),能量多普勒信息的平均信号强度;以及血管化血流指数(VFI),通过两者相乘得出的综合因素。在该模型中通过添加组织模拟块来研究衰减。我们的结果显示流速与血管指数VI和VFI之间存在可预测的关系。然而,FI作为血流的预测指标不太可靠;因此,应谨慎解释。能量多普勒信号受到衰减的显著影响,在所使用的模型中,在6厘米深度处导致信息完全丢失。总之,该模型可进行调整以提供一个模拟体来分析和量化三维能量多普勒信号,并表明组织内的血管指数与体积流量仍然相关。该模型进一步证明,在探头未与感兴趣组织直接接触的任何体内研究中,都需要考虑信号的深度依赖性衰减。