Bhattacharyya Dhiman, Pillai Karthikeyan, Chyan Oliver M R, Tang Liping, Timmons Richard B
Department of Chemistry and Biochemistry, University of Texas at Arlington, Arlington, TX - 76019-0065.
Chem Mater. 2007 May 1;19(9):2222-2228. doi: 10.1021/cm0630688.
A simple, direct route to preparation of surface immobilized hydrogel films is described. Specifically, low pressure RF pulsed plasma polymerization of 1-amino-2-propanol and 2-(ethylamino)ethanol monomers produced thin hydrogel films deposited on substrates located in the plasma reactor. The successful syntheses were carried out under plasma conditions which not only yield the hydrogel but are also sufficiently energetic to produce films strongly grafted to the substrates. The polymer films obtained exhibit the thermoresponsive property of hydrogels, as shown by film color change with temperature. Additional evidence for the phase transition properties of these films was obtained using water contact angle and capillary rise measurements. The plasma polymerization approach provides an unusually simple route to synthesis of hydrogels in which the films are pin-hole free and are of easily controlled thickness. An important added advantage, particularly for applications involving biomaterials, is the conformal property of the plasma generated polymer films. The results obtained suggest that this approach should be applicable to a variety of other monomers and, based on differences observed with the present two monomers, suggest synthesis of films which exhibit a range of phase transition temperatures.
本文描述了一种制备表面固定水凝胶薄膜的简单直接方法。具体而言,通过1-氨基-2-丙醇和2-(乙氨基)乙醇单体的低压射频脉冲等离子体聚合,在位于等离子体反应器中的基底上制备出了薄水凝胶薄膜。成功的合成是在等离子体条件下进行的,该条件不仅能生成水凝胶,而且能量足以产生牢固接枝到基底上的薄膜。所得聚合物薄膜表现出水凝胶的热响应特性,如薄膜颜色随温度变化所示。通过水接触角和毛细管上升测量获得了这些薄膜相变特性的额外证据。等离子体聚合方法为合成水凝胶提供了一种异常简单的途径,所制备的薄膜无针孔且厚度易于控制。一个重要的额外优势,特别是对于涉及生物材料的应用,是等离子体产生的聚合物薄膜的保形特性。所获得的结果表明,这种方法应适用于多种其他单体,并且基于目前两种单体观察到的差异,表明可以合成具有一系列相变温度的薄膜。