A further discussion of the factors controlling the distribution of Pt, Pd, Rh and Au in road dust, gullies, road sweeper and gully flusher sediment in the city of Sheffield, UK.

Forty paired road dust and gully sediments from the city of Sheffield in NE England show that high platinum, palladium and rhodium concentrations derived from catalytic converters depend on proximity to both roundabouts rather than traffic lights and to topographic lows. Road dust outside schools and control samples, further away on the same road, show that Pt, Pd and Rh concentrations are dependent on passing traffic flow rather than numbers of stopping vehicles. Highest values of Pt+Pd in road dust are 852 ppb and 694 ppb in gullies. Rh has maximum values of 113 ppb in road dust and 49 ppb in gullies. Pt and Pd values of a few ppb to just over 100 ppb occur in road dust where traffic does not stop, on roads away from junctions. Pt, Pd, Rh and Au are all picked up by road sweepers and gully flushers both with maximum values of just over 100 ppb Pt and Pd. High Au values (maximum 610 ppb in a road dust) were located on pavements, in suburbs, outside schools and in road sweepers collecting in residential areas rather than on high traffic flow roads. Stratification of Pt and Pd in gullies was not observed whereas a high Au value was recorded at the bottom of a gully suggesting gravity concentration for Au. Anomalous Pd grades of 1050 ppb in road dust from a school entrance and 2040 ppb in a street sweeper sample were recorded. These high Pd- and Au-bearing samples do not have anomalous Pt or Rh values and may be sourced from jewellery or dental fillings. However, most samples have consistent Pt/Pd ratios of about 1 and Pt/Rh values of 4 to 5 indicating a catalytic converter source. Pt and Pd are concentrated in road dust at levels well above background in all the samples, including on high and low traffic flow roads.