Montealegre-Z Fernando, Windmill James F C, Morris Glenn K, Robert Daniel
School of Biological Sciences, University of Bristol, Woodland Road, Bristol, BS8 1UG, UK.
J Exp Biol. 2009 Jan;212(Pt 2):257-69. doi: 10.1242/jeb.022731.
Male crickets produce stridulatory songs using engaged tegmina (forewings): a plectrum on the left sweeps along a tooth row on the right. During stridulation, the plectrum moves across the teeth and vibrations are amplified by the surrounding cells and veins, resonating at the frequency of tooth impacts. The advance of the plectrum on the file is controlled by an escapement mechanism so that passing each single tooth generates one wave of a highly tonal signal. Both tegmina must oscillate in phase to avoid destructive interference. But as each plectrum-tooth contact begins, the right and left tegmina react in opposite oscillatory directions. A mechanical phase shifter is part of the left tegmen and compensates to achieve wing oscillation synchrony. We use a new technique to simulate plectrum-on-file interactions: in combination with laser vibrometry, this technique assessed plectrum mechanics in the cricket Gryllus bimaculatus. Using an excised teneral file, shaped like a partial gear and moved by a motor, and a microscan Doppler laser vibrometer, plectrum and left-tegmen mechanics were explored. The results show that plectrum and harp oscillate with a phase difference of ca. 156 deg., a shift rather than a complete phase inversion (180 deg.). This phase shift occurs at the site of a large wing vein (possibly A3). Plectrum and harp vibrate with similar fundamental frequency, therefore, plectrum torsion resonant frequency is important for maintaining vibration coherence. The mechanical aspects involved in this partial phase inversion are discussed with respect to the escapement mechanism. The plectrum mechanics and its implications in katydid stridulation are also considered.
雄性蟋蟀通过相互摩擦的覆翅(前翅)发出摩擦声:左边的一个拨弦结构沿着右边的一排齿扫过。在摩擦发声时,拨弦结构在齿上移动,振动由周围的细胞和翅脉放大,以齿撞击的频率产生共振。拨弦结构在音锉上的推进由一个擒纵机构控制,这样每次经过单个齿时都会产生一个高音调信号的波。两个覆翅必须同相振荡以避免相消干涉。但是在每次拨弦结构与齿接触开始时,左右覆翅会以相反的振荡方向做出反应。一个机械移相器是左覆翅的一部分,它起到补偿作用以实现翅的振荡同步。我们使用一种新技术来模拟拨弦结构与音锉的相互作用:结合激光测振技术,该技术评估了双斑蟋的拨弦结构力学。使用一个切除的嫩音锉,其形状像一个部分齿轮,由电机驱动,以及一个微扫描多普勒激光测振仪,对拨弦结构和左覆翅的力学进行了探究。结果表明,拨弦结构和竖琴状结构以约156度的相位差振荡,是一种偏移而非完全的相位反转(180度)。这种相位偏移发生在一条大翅脉(可能是A3)的位置。拨弦结构和竖琴状结构以相似的基频振动,因此,拨弦结构的扭转共振频率对于维持振动相干性很重要。结合擒纵机构讨论了这种部分相位反转所涉及的力学方面。还考虑了拨弦结构力学及其在纺织娘摩擦发声中的意义。