Murphy J, Boyle F
Mechanical Engineering Department at the Dublin Institute of Technology, Ireland.
Annu Int Conf IEEE Eng Med Biol Soc. 2008;2008:5906-9. doi: 10.1109/IEMBS.2008.4650559.
Coronary stent implantation can improve blood flow in an artery that has been narrowed by the build up of arterial plaque. However, the implantation of the stent will change the geometry of the vessel wall. The haemodynamic effects of the stents presence and alteration of the vessel wall are unclear. The redistribution of flow induced vessel wall shear stress (WSS) and wall shear stress gradient (WSSG) may directly contribute to restenosis (re-blockage). Computational fluid dynamics (CFD) is used extensively to identify these parameters in stented vessels. However, simplifications to the model of the stented artery are common. In this paper, computational domains of stented arteries with increasing levels of physiological realism are created. CFD is used to predict the WSS and WSSG for each set of computational domains. Finally, the results show that certain simplifications are not valid for CFD analyses of implanted coronary stents.
冠状动脉支架植入可以改善因动脉斑块堆积而变窄的动脉中的血流。然而,支架的植入会改变血管壁的几何形状。支架存在以及血管壁改变所产生的血流动力学效应尚不清楚。血流再分布引起的血管壁剪切应力(WSS)和壁面剪切应力梯度(WSSG)可能直接导致再狭窄(再次堵塞)。计算流体动力学(CFD)被广泛用于识别植入支架血管中的这些参数。然而,对带支架动脉模型进行简化很常见。在本文中,创建了具有不同生理真实度水平的带支架动脉的计算域。CFD用于预测每组计算域的WSS和WSSG。最后,结果表明某些简化对于植入冠状动脉支架的CFD分析是无效的。