Wen Ke, Maoz Rivka, Cohen Hagai, Sagiv Jacob, Gibaud Alain, Desert Anne, Ocko Benjamin M
Department of Materials and Interface, The Weizmann Institute of Science, Rehovot 76100, Israel.
ACS Nano. 2008 Mar;2(3):579-99. doi: 10.1021/nn800011t.
Experimental evidence derived from a comprehensive study of a self-assembled organosilane multilayer film system undergoing a process of postassembly chemical modification that affects interlayer-located polar groups of the constituent molecules while preserving its overall molecular architecture allows a quantitative evaluation of both the degree of intralayer polymerization and that of interlayer covalent bonding of the silane headgroups in a highly ordered layer assembly of this type. The investigated system consists of a layer-by-layer assembled multilayer of a bifunctional n-alkyl silane with terminal alcohol group that is in situ converted, via a wet chemical oxidation process conducted on the entire multilayer, to the corresponding carboxylic acid function. A combined chemical-structural analysis of data furnished by four different techniques, Fourier transform infrared spectroscopy (FTIR), synchrotron X-ray scattering, X-ray photoelectron spectroscopy (XPS), and contact angle measurements, demonstrates that the highly ordered 3D molecular arrangement of the initial alcohol-silane multilayer stack is well preserved upon virtually quantitative conversion of the alcohol to carboxylic acid and the concomitant irreversible cleavage of interlayer covalent bonds. Thus, the correlation of quantitative chemical and structural data obtained from such unreacted and fully reacted film samples offers an unprecedented experimental framework within which it becomes possible to differentiate between intralayer and interlayer covalent bonding. In addition, the use of a sufficiently thick multilayer effectively eliminates the interfering contributions of the underlying silicon oxide substrate to both the X-ray scattering and XPS data. The present findings contribute a firm experimental basis to the elucidation of the self-assembly mechanism, the molecular organization, and the modes and dynamics of intra- and interlayer bonding prevailing in highly ordered organosilane films; with further implications for the rational exploitation of some of the unique options such supramolecular surface entities can offer in the advancement of a chemical nanofabrication methodology.
通过对一个自组装有机硅烷多层膜系统进行全面研究获得的实验证据表明,该系统经历了后组装化学修饰过程,此过程影响了构成分子中层间定位的极性基团,同时保留了其整体分子结构,从而能够对这种高度有序层组装中硅烷头基的层内聚合程度和层间共价键合程度进行定量评估。所研究的系统由具有末端醇基的双功能正烷基硅烷的逐层组装多层膜组成,通过在整个多层膜上进行的湿化学氧化过程,原位将其转化为相应的羧酸官能团。由傅里叶变换红外光谱(FTIR)、同步加速器X射线散射、X射线光电子能谱(XPS)和接触角测量这四种不同技术提供的数据进行的化学 - 结构联合分析表明,当初始醇 - 硅烷多层堆叠体中的醇几乎定量转化为羧酸并伴随层间共价键的不可逆断裂时,其高度有序的三维分子排列得到了很好的保留。因此,从此类未反应和完全反应的薄膜样品获得的定量化学和结构数据的相关性提供了一个前所未有的实验框架,在此框架内能够区分层内和层间共价键合。此外,使用足够厚的多层膜有效地消除了底层氧化硅衬底对X射线散射和XPS数据的干扰贡献。本研究结果为阐明自组装机制、分子组织以及高度有序有机硅烷膜中普遍存在的层内和层间键合模式及动力学提供了坚实的实验基础;对合理利用此类超分子表面实体在推进化学纳米制造方法方面可以提供的一些独特选择具有进一步的意义。