Krejci Jakub, Salinger Jiri, Gallo Jiri, Kolisko Petr, Stepanik Petr
Department of Biomechanics and Engineering Cybernetics, Faculty of Physical Culture, Palacky University, Olomouc, Czech Republic.
Biomed Pap Med Fac Univ Palacky Olomouc Czech Repub. 2008 Dec;152(2):275-81. doi: 10.5507/bp.2008.043.
The accuracy of non-radiographic measurement of the spinal shape is influenced by postural sway (PS). The aim of this study was to determine whether certain examination postures prevent PS without changing key spinal characteristics.
We tested 1) natural standing position (posture A), 2) fixation postures standing with the support of the upper limbs against a wall (posture B) and 3) standing with the support of the head and chest against a wall (posture C). There were examined 60 subjects; the examination of each posture was repeated five times in each individual by DTP-3 microcomputer position system. The spinal shape changes resulting from tested postures were assessed using t-test. The role of PS was assessed using standard deviations, and the significance of differences between the individual postures was determined using the F-test.
Compared to posture A, the fixation posture B did not have any significant influence on the degree of PS, but it significantly influenced the shift of the spine from the ideal vertical and its slope, although this did not result in spine curve deformation. The fixation posture C significantly reduced the PS compared to posture A; however, there were significant changes in the spinal shape. This fixation posture shifted significantly the spine from the ideal vertical and slope characteristics.
PS plays a role in the examination of spinal shape. Positions B and C did not meet the required criteria. Therefore, it is necessary to search for another examination position.
脊柱形态的非影像学测量准确性受姿势摆动(PS)影响。本研究旨在确定某些检查姿势能否在不改变关键脊柱特征的情况下防止姿势摆动。
我们测试了1)自然站立位(姿势A)、2)上肢靠墙支撑站立的固定姿势(姿势B)和3)头胸部靠墙支撑站立(姿势C)。共检查了60名受试者;每个姿势的检查在每个个体中通过DTP - 3微机定位系统重复进行5次。使用t检验评估测试姿势导致的脊柱形态变化。使用标准差评估姿势摆动的作用,并使用F检验确定各个姿势之间差异的显著性。
与姿势A相比,固定姿势B对姿势摆动程度没有显著影响,但它显著影响了脊柱相对于理想垂直线的偏移及其斜率,尽管这并未导致脊柱曲线变形。与姿势A相比,固定姿势C显著降低了姿势摆动;然而,脊柱形态有显著变化。这种固定姿势使脊柱相对于理想垂直线和斜率特征发生了显著偏移。
姿势摆动在脊柱形态检查中起作用。姿势B和C不符合要求标准。因此,有必要寻找另一种检查姿势。