Influences of aquifer properties on flow dimensions in dolomites.

The paper focuses on analyses and correlations of flow dimensions in different dolomite aquifers in Slovenia. Flow dimensions are obtained through the reinterpretation of 72 pumping tests with the generalized radial flow model, based on the fractional flow dimension. The average value of flow dimensions is 2.16 for all dolomites. A study of flow dimensions in individual aquifers categorized according to their lithological properties shows that higher dimensions occur in massive late-diagenetic Cordevolian and Anisian dolomites compared with bedded Main, Baca, and especially Lower Triassic dolomites, which contain a greater proportion of noncarbonate minerals. Partially penetrating wells have higher flow dimensions than fully penetrating wells. Flow dimensions are poorly correlated with hydraulic conductivities of fractures. When comparing the quantities of major dissolved minerals, obtained by hydrogeochemical inverse modeling, with the values of flow dimensions, the Cordevolian and Anisian dolomites are found to exhibit the highest values of both dissolved dolomite and flow dimensions, indicating that greater dissolution occurs at higher flow dimensions. For other aquifers, data points are more scattered and the correlation is mostly poor. When compared with three-dimensional fractal dimensions of fracture networks, there is no correlation with flow dimensions. However, almost all the values of flow dimensions are lower than the corresponding fractal dimensions in dolomites (average D= 2.77), possibly indicating the channeling of flow within the available space of the fracture networks, consequently reducing the flow dimensions.