• 文献检索
  • 文档翻译
  • 深度研究
  • 学术资讯
  • Suppr Zotero 插件Zotero 插件
  • 邀请有礼
  • 套餐&价格
  • 历史记录
应用&插件
Suppr Zotero 插件Zotero 插件浏览器插件Mac 客户端Windows 客户端微信小程序
定价
高级版会员购买积分包购买API积分包
服务
文献检索文档翻译深度研究API 文档MCP 服务
关于我们
关于 Suppr公司介绍联系我们用户协议隐私条款
关注我们

Suppr 超能文献

核心技术专利:CN118964589B侵权必究
粤ICP备2023148730 号-1Suppr @ 2026

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验

用于[修正后的]下水道渠道中活动堰实时控制的P控制器校准。

P controller calibration for the real time control of moveable weirs in [corrected] sewer channels.

作者信息

Campisano A, Creaco E, Modica C

机构信息

Dipartimento di Ingegneria Civile e Ambientale, Università di Catania, 95125 Catania, Italy.

出版信息

Water Sci Technol. 2009;59(11):2237-44. doi: 10.2166/wst.2009.272.

DOI:10.2166/wst.2009.272
PMID:19494464
Abstract

In this paper, a detailed study on the local real time control of moveable sharp-crested weirs in sewer channels is presented. Firstly, an experimental analysis aimed at determining the hydraulic behaviour of the regulator under both free flow and submerged flow conditions was carried out. Then, a numerical investigation into the calibration of proportional (P) controllers for the weir control was performed. In particular, suitable values were evaluated for the controller proportional parameter in order to obtain quick regulations and avoid the occurrence of permanent water level oscillations behind the weir. A dimensionless approach was adopted for the generalisation of the results.

摘要

本文对下水道渠道中可移动锐缘堰的局部实时控制进行了详细研究。首先,进行了旨在确定调节器在自由流和淹没流条件下的水力特性的实验分析。然后,对堰控制的比例(P)控制器的校准进行了数值研究。特别是,评估了控制器比例参数的合适值,以实现快速调节并避免堰后出现永久性水位振荡。采用无量纲方法对结果进行了归纳。

相似文献

1
P controller calibration for the real time control of moveable weirs in [corrected] sewer channels.用于[修正后的]下水道渠道中活动堰实时控制的P控制器校准。
Water Sci Technol. 2009;59(11):2237-44. doi: 10.2166/wst.2009.272.
2
PID and PLC units for the real-time control of sewer systems.用于下水道系统实时控制的PID和PLC单元。
Water Sci Technol. 2002;45(7):95-104.
3
Determining the spill flow discharge of combined sewer overflows using rating curves based on computational fluid dynamics instead of the standard weir equation.利用基于计算流体动力学的水位流量关系曲线而非标准堰流公式来确定合流制污水溢流的溢出流量。
Water Sci Technol. 2009;60(12):3035-43. doi: 10.2166/wst.2009.752.
4
Influence of characteristics on combined sewer performance.特性对合流制排水系统性能的影响。
Water Sci Technol. 2012;66(5):1052-60. doi: 10.2166/wst.2012.280.
5
Optimization of measurement campaigns for calibration of a conceptual sewer model.用于概念性下水道模型校准的测量活动优化
Water Sci Technol. 2009;59(8):1523-30. doi: 10.2166/wst.2009.154.
6
Flow velocities and shear stresses during flushing operations in sewer collectors.下水道集水管冲洗作业期间的流速和剪应力。
Water Sci Technol. 2003;47(4):123-8.
7
Experimental analysis of the hydrass flushing gate and field validation of flush propagation modelling.水葫芦冲洗闸门的实验分析及冲洗传播模型的现场验证
Water Sci Technol. 2005;51(2):129-37.
8
Hydraulic modelling of sewage exfiltration.
Water Sci Technol. 2009;59(8):1559-65. doi: 10.2166/wst.2009.172.
9
CSOs: tools for assessing their operation in our systems.公民社会组织:评估其在我们系统中运作情况的工具。
Water Sci Technol. 2005;51(2):179-85.
10
Evaluation of the causes of inundation in a repeatedly flooded zone in the city of Cheongju, Korea, using a 1D/2D model.利用一维/二维模型评估韩国清州市反复被淹没地区的淹没原因。
Water Sci Technol. 2014;69(11):2175-83. doi: 10.2166/wst.2014.077.