Center for General Education, Chang Gung University, 259 Wen-Hwa first Road, Kwei-Shan Tao-Yuan, Taiwan, 333 Republic of China.
J Phys Chem A. 2010 Mar 25;114(11):3773-81. doi: 10.1021/jp904434e.
Commercially available Ni/Al(2)O(3) samples containing various concentrations of potassium were used to achieve carbon deposition from CO(2) via catalytic hydrogenation. Experimental results show that K additives can induce the formation of carbon nanofibers or carbon deposition on Ni/Al(2)O(3) during the reverse water-gas shift reaction. This work proposes that the formation rate of carbon deposition depends closely on ensemble control, suggesting that the ensemble size necessary to form carbon may be approximately 0.5 potassium atoms. The results of CO(2) temperature-programmed desorption provide strong evidence that the new adsorption sites for CO(2) created on Ni-K/Al(2)O(3) closely depend upon the synthesis of carbon nanofibers. It is found that some potassium-related active phases obtained by calcination and reduction pretreatments can participate in the carbon deposition reaction. The formation pathway for carbon deposition suggests that the main source of carbon deposition is CO(2) and that the pathway is independent of the reaction products CO and CH(4) in the reverse water-gas shift reaction.
商用的 Ni/Al(2)O(3) 样品中含有不同浓度的钾,可用于通过催化加氢从 CO(2) 实现碳沉积。实验结果表明,K 添加剂可以在逆水煤气变换反应过程中诱导 Ni/Al(2)O(3 上形成碳纳米纤维或碳沉积。这项工作提出,碳沉积的形成速率与整体控制密切相关,这表明形成碳所需的整体尺寸可能约为 0.5 个钾原子。CO(2) 程序升温脱附的结果提供了强有力的证据,表明在 Ni-K/Al(2)O(3 上形成的新的 CO(2)吸附位与碳纳米纤维的合成密切相关。发现一些通过煅烧和还原预处理获得的与钾有关的活性相可以参与碳沉积反应。碳沉积的形成途径表明,碳沉积的主要来源是 CO(2),并且该途径与逆水煤气变换反应中的反应产物 CO 和 CH(4)无关。