Department of Mechanical Engineering and Mechanics, Drexel University, 3141 Chestnut St, Philadelphia, PA 19104, United States.
Chem Phys Lipids. 2009 Nov;162(1-2):34-52. doi: 10.1016/j.chemphyslip.2009.07.007. Epub 2009 Aug 7.
Using micropipette-based probing methods and an image processing algorithm for measuring deformation, the bending energies of aspirated DOPC:DOPS liposomes were estimated both before and during manipulation with an injection pipette. We found that unlike cells, which are penetrable with pipettes as large as 2mum in diameter and at speeds as slow as 4mum/s, liposomes, without a cytoskeleton to resist deformation, are impenetrable with pipettes as small as 25nm in diameter and at speeds as great as 4000mum/s. Using energy calculations and the previously published mechanical properties of DOPC:DOPS liposomes, the forces that injection pipettes of various sizes can exert onto liposomes during probing were estimated. Forces ranged from approximately 1pN to 6pN, and the forces exerted onto these liposomes increased as pipette size diminished. The quantification of the amount of force exerted on liposomes or cells during manipulation can assist in minimizing the damage during single-liposome, single-cell, or single-organelle injections and surgeries.
使用基于微量移液器的探测方法和图像处理算法来测量变形,我们在使用注射移液器进行操作之前和期间估计了被吸入的 DOPC:DOPS 脂质体的弯曲能。我们发现,与细胞不同,细胞可以被直径达 2 微米且速度慢至 4 微米/秒的移液器穿透,而没有细胞骨架来抵抗变形的脂质体,即使使用直径小至 25 纳米且速度高达 4000 微米/秒的移液器也无法穿透。使用能量计算和先前发表的 DOPC:DOPS 脂质体的机械性能,估计了各种大小的注射移液器在探测期间可以对脂质体施加的力。力的范围约为 1pN 至 6pN,并且施加到这些脂质体上的力随着移液器尺寸的减小而增加。在操作过程中对脂质体或细胞施加的力的定量可以帮助最小化在单个脂质体、单个细胞或单个细胞器注射和手术期间的损伤。