Suppr超能文献

利用体尺评定放牧杂交公牛的胴体和体脂组成。

Determination of carcass and body fat compositions of grazing crossbred bulls using body measurements.

机构信息

State University of Mato Grosso do Sul, Aquidauana, Mato Grosso do Sul, Brazil 79200-000.

出版信息

J Anim Sci. 2010 Apr;88(4):1442-53. doi: 10.2527/jas.2009-1919. Epub 2009 Nov 20.

Abstract

The objectives of this study were to analyze body measurements of 40 crossbred bulls grazing low quality forage with different supplementation strategies, to estimate interrelationships among those measurements and carcass and body compositions, and to develop systems of equations to predict body fat using body and carcass measurements. Eight animals were slaughtered at the beginning of the experiment, and the remaining animals were slaughtered at 90 or 220 d. The biometric measures (BM) were obtained the day before the slaughter and included hook width, pin width, pelvic girdle length, rump depth, rump height, abdomen width, body length, height at withers, rib depth, girth, and body diagonal length. Other measurements included full, shrunk, and empty BW; internal physical and chemical fats; body volume; body area; carcass weight; 9th- to 11th-rib section weight and composition; fat thickness; subcutaneous fat; intermuscular fat; carcass chemical fat; and empty body physical and chemical fats. The relationships between BM and body components were evaluated, and equations to predict body area, body volume, subcutaneous fat, and carcass and body physical and chemical fat were developed. Biological interpretations of the parameter estimates of equations were similar to those found in the literature such as a ratio of 1 kg of subcutaneous fat to 1.6 kg of intermuscular fat and a deposit of 72 to 76% of body fat in the carcass. The first system used to predict carcass and empty body physical and chemical fat was devised using in vivo information, whereas the second system used BW and the 9th- to 11th-rib fat weight. Our results indicated the combination of BW, carcass traits, and BM was precise and accurate in estimating carcass and body fat composition of backgrounding bulls. The second system had better adequacy statistics [r(2) > 0.92, concordance correlation coefficient (CCC) > 0.957, and root mean square error (RMSE) < 14.4% of the average observed value] compared with the first system. The first system had acceptable adequacy statistics (r(2) > 0.767, CCC > 0.866, and RMSE varying from 15.8 to 22.3% of the average observed value). For both systems, the simultaneous F-test of the linear regression of observed on model-predicted values indicated intercepts were equal to zero, and slopes were equal to 1 (P > 0.246). We concluded that BM can improve the accuracy and precision of the predictions of body composition of grazing animals.

摘要

本研究的目的是分析 40 头杂交公牛在放牧低质量饲草时的体尺,研究不同补饲策略对体尺的影响,估计体尺与胴体和体成分之间的相互关系,并建立利用体尺预测体脂的方程组。本研究在实验开始时屠宰了 8 头动物,其余动物在 90 或 220 天屠宰。在屠宰前一天获得了生物计量学测量值(BM),包括钩宽、钉宽、骨盆带长度、臀部深度、臀部高度、腹部宽度、体长、肩高、肋骨深度、胸围、体对角线长度。其他测量值包括全重、缩重和空腹 BW;内部物理和化学脂肪;体体积;体面积;胴体重;第 9 至 11 肋骨节重及组成;脂肪厚度;皮下脂肪;肌间脂肪;胴体化学脂肪;空腹体物理和化学脂肪。评估了 BM 与体成分之间的关系,并建立了预测体面积、体体积、皮下脂肪和胴体及体物理和化学脂肪的方程。方程参数估计的生物学解释与文献中的解释相似,例如每 1 公斤皮下脂肪对应 1.6 公斤肌间脂肪,以及 72%至 76%的体脂肪沉积在胴体中。第一个预测胴体和空腹体物理和化学脂肪的系统是利用体内信息设计的,而第二个系统则使用 BW 和第 9 至 11 肋骨脂肪重量。我们的结果表明,BW、胴体性状和 BM 的组合在估计育肥公牛的胴体和体脂肪组成方面是精确和准确的。第二个系统的充分性统计数据[r(2)>0.92,一致性相关系数(CCC)>0.957,均方根误差(RMSE)<平均观测值的 14.4%]优于第一个系统。第一个系统的充分性统计数据也可以接受[r(2)>0.767,CCC>0.866,RMSE 变化范围为平均观测值的 15.8%至 22.3%]。对于两个系统,观察值对模型预测值的线性回归的同时 F 检验表明截距为零,斜率为 1(P>0.246)。我们得出结论,BM 可以提高放牧动物体成分预测的准确性和精度。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验