Dallas, Texas; and London, United Kingdom From the Department of Plastic Surgery, University of Texas Southwestern Medical Center, and Queen Mary University of London.
Plast Reconstr Surg. 2009 Dec;124(6):1759-1769. doi: 10.1097/PRS.0b013e3181bf815f.
The internal mammary artery perforator flap has been used in head and neck reconstruction. Although anatomical and perfusion studies with ink have been performed previously, the authors now use three- and four-dimensional computed tomographic angiography to precisely visualize vascular anatomy of individual perforators (perforasomes) and the axiality of perfusion.
Eleven hemichest adipocutaneous flaps were dissected from cadavers. Measurements were recorded, such as the distance of each internal mammary artery perforator from the sternal edge, diameter of vessels, and number and location of internal mammary artery perforators per hemichest. Single internal mammary artery perforator injections with Isovue contrast were carried out, and the flaps were subjected to dynamic computed tomographic scanning. Static computed tomographic scanning was also undertaken using a barium-gelatin mixture. Images were viewed using both General Electric and TeraRecon systems, allowing the appreciation of vascular territory (three-dimensional), and analysis of perfusion flow (four-dimensional).
Each hemichest flap had one to three internal mammary artery perforators, most commonly in intercostal spaces 1, 2, and 3. Twenty-six internal mammary artery perforators were dissected, and 19 perforator arteries and six perforator veins were injected with contrast. The internal mammary artery perforator in the second intercostal space had the largest mean diameter and a large vascular territory. Linking vessels, both direct and indirect, communicate between perforators and can enlarge perforasomes. Linking vessels were also found between internal mammary artery perforators and the lateral thoracic artery.
Three- and four-dimensional computed tomographic angiography allows detailed analysis of vascular anatomy. Important information such as internal mammary artery perforator flap dimensions, linking vessels, and axiality of perfusion is elucidated, thus contributing to a better understanding of perforator flaps.
内乳动脉穿支皮瓣已用于头颈部重建。尽管之前已经进行了墨水的解剖和灌注研究,但作者现在使用三维和四维计算机断层血管造影术来精确地可视化各个穿支(穿支体)的血管解剖结构和灌注的轴向。
从尸体上解剖了 11 个半胸部脂肪皮瓣。记录了各项测量值,例如每个内乳动脉穿支距胸骨缘的距离、血管直径以及每个半胸部的内乳动脉穿支数量和位置。对每个内乳动脉穿支进行单独的碘对比剂注射,并对皮瓣进行动态计算机断层扫描。还使用钡-明胶混合物进行静态计算机断层扫描。使用 General Electric 和 TeraRecon 系统查看图像,允许欣赏血管区域(三维),并分析灌注流量(四维)。
每个半胸部皮瓣有 1 到 3 个内乳动脉穿支,最常见于肋间空间 1、2 和 3。解剖出 26 个内乳动脉穿支,注射了 19 个穿支动脉和 6 个穿支静脉造影剂。第二肋间的内乳动脉穿支具有最大的平均直径和较大的血管区域。直接和间接的连接血管在穿支之间进行沟通,并可以扩大穿支体。还在内乳动脉穿支和外侧胸动脉之间发现了连接血管。
三维和四维计算机断层血管造影术允许对血管解剖结构进行详细分析。阐明了诸如内乳动脉穿支皮瓣尺寸、连接血管和灌注的轴向等重要信息,从而有助于更好地理解穿支皮瓣。