Department of Internal Medicine and Systemic Disease, Clinical Division of Cardiology, Ferrarotto Hospital, University of Catania, Italy.
J Interv Cardiol. 2010 Feb;23(1):46-53. doi: 10.1111/j.1540-8183.2009.00512.x. Epub 2009 Dec 3.
Conventional two-dimensional angiography lacks the ability to properly image the true bifurcation geometry, and its percutaneous coronary intervention-induced changes in the clinical setting.
A novel three-dimensional reconstruction system was investigated by retrospectively analyzing 39 lesions in 35 consecutive patients with coronary bifurcation disease treated with the mini-crush technique. At baseline, significant correlations were proved between two- and three-dimensional systems in terms of either reference vessel diameter (R(2)= 0.68 and 0.29 for main and side branches, respectively), minimum lumen diameter (R(2)= 0.73 and 0.36), stenosis diameter (R(2)= 0.69 and 0.29), and lesion length (R(2)= 0.48 and 0.58). These results were consistent with those observed after the procedure and at 8-month follow-up. Lesion length was significantly longer with the three-dimensional compared to the two-dimensional system for both main and side branches (P < 0.001, and P = 0.007, respectively).
The three-dimensional quantitative reconstruction system may provide accurate evaluation of the complex curvilinear structure of bifurcation lesions when using a double stent technique.
传统的二维血管造影术缺乏对真实分叉几何形状进行适当成像的能力,并且在临床环境中其经皮冠状动脉介入治疗引起的变化。
通过回顾性分析 35 例连续接受冠状动脉分叉病变迷你挤压技术治疗的患者的 39 个病变,研究了一种新型的三维重建系统。在基线时,二维和三维系统在参考血管直径(主支和侧支的 R(2)分别为 0.68 和 0.29)、最小管腔直径(R(2)分别为 0.73 和 0.36)、狭窄直径(R(2)分别为 0.69 和 0.29)和病变长度(R(2)分别为 0.48 和 0.58)方面均表现出显著相关性。这些结果与术后和 8 个月随访时的结果一致。与二维系统相比,三维系统测量的主支和侧支的病变长度均明显更长(P<0.001 和 P=0.007)。
当使用双支架技术时,三维定量重建系统可能为分叉病变的复杂曲线结构提供准确的评估。