Department of Chemistry, University of Florida, PO Box 117200, Gainesville, FL 32611, USA.
Nanotechnology. 2010 Feb 5;21(5):055703. doi: 10.1088/0957-4484/21/5/055703. Epub 2009 Dec 21.
Hybrid organic-inorganic templates and core-shell nanoparticles were used as models to study the communication between fluorescent probes placed inside nanoparticles. The hybrid templates were prepared on the basis of a mixed-surfactant system using octadecyltrimethoxysilane as a reactive amphiphile. The core-shell particles were obtained after coating of the templates with a siloxane shell, using the silanol groups on their surface. Atomic force microscopy imaging showed that the templates were made of a flexible material that flattened significantly after deposition on a substrate and evaporation of the solvent. Pyrene was sequestered by the templates in an aqueous suspension, which placed it in a nonpolar environment, as observed by its fluorescence response. Subsequently, double-doped templates were prepared by sequestering coumarin 153 (C153), with pyrene-doped hybrid templates. The communication between these probes was studied on the basis of their spectral properties, by means of fluorescence resonance energy transfer (FRET). Energy transfer between the dyes with efficiencies up to 55% was observed. Similarly, double-doped core-shell particles prepared on the basis of the hybrid templates were doped with this pair of dyes. Despite the presence of the shell, which was intended to increment the average separation between the probes, interaction of the dyes was observed, although with lower efficiencies. A similar study was performed with C153 and 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H-pyran (DCM). FRET studies indicated that the probes were placed in proximity to each other. We confirmed these observations by means of fluorescence lifetime measurements, which showed a decrease in the lifetime of the donor upon addition of the acceptor.
杂化有机-无机模板和核壳纳米粒子被用作模型,以研究置于纳米粒子内部的荧光探针之间的通讯。杂化模板是基于混合表面活性剂体系,使用十八烷基三甲氧基硅烷作为反应性两亲物制备的。模板表面的硅醇基团被硅氧烷壳层涂覆后,得到核壳粒子。原子力显微镜成像显示,模板由一种柔性材料制成,在沉积到基底上并蒸发溶剂后,会显著扁平化。在水悬浮液中,模板将芘隔离在非极性环境中,这可以通过其荧光响应观察到。随后,通过将香豆素 153(C153)与芘掺杂的杂化模板共掺杂,制备了双掺杂模板。通过荧光共振能量转移(FRET)研究了这些探针之间的通讯基于它们的光谱特性。观察到染料之间的能量转移效率高达 55%。同样,基于杂化模板制备的双掺杂核壳粒子也被掺杂了这对染料。尽管存在壳层旨在增加探针之间的平均分离,但仍观察到染料之间的相互作用,尽管效率较低。用 C153 和 4-(二氰基亚甲基)-2-甲基-6-对-(二甲氨基)苯乙烯基-4H-吡喃(DCM)进行了类似的研究。FRET 研究表明探针彼此靠近。通过荧光寿命测量证实了这些观察结果,在加入受体后,供体的寿命会降低。