Department of Chemistry and Biochemistry, Southern Illinois University at Carbondale, Carbondale, Illinois 62901, USA.
Anal Chem. 2010 Jan 1;82(1):307-15. doi: 10.1021/ac901982u.
The separation of organelles by capillary electrophoresis (CE) produces large numbers of narrow peaks, which commonly are assumed to originate from single particles. In this paper, we show this is not always true. Here, we use established methods to partition simulated and real organelle CEs into regions of constant peak density and then use statistical-overlap theory to calculate the number of peaks (single particles) in each region. The only required measurements are the number of observed peaks (maxima) and peak standard deviation in the regions and the durations of the regions. Theory is developed for the precision of the estimated peak number and the threshold saturation above which the calculation is not advisable due to fluctuation of peak numbers. Theory shows that the relative precision is good when the saturation lies between 0.2 and 1.0 and is optimal when the saturation is slightly greater than 0.5. It also shows the threshold saturation depends on the peak standard deviation divided by the region's duration. The accuracy and precision of peak numbers estimated in different regions of organelle CEs are verified by computer simulations having both constant and nonuniform peak densities. The estimates are accurate to 6%. The estimated peak numbers in different regions are used to calculate migration-time and electrophoretic-mobility distributions. These distributions are less biased by peak overlap than ones determined by counting maxima and provide more correct measures of the organelle properties. The procedure is applied to a mitochondrial CE, in which over 20% of peaks are hidden by peak overlap.
用毛细管电泳(CE)分离细胞器会产生大量的窄峰,这些峰通常被认为是来自单个粒子。在本文中,我们证明情况并非总是如此。在这里,我们使用已建立的方法将模拟和真实细胞器的 CE 分成具有恒定峰密度的区域,然后使用统计重叠理论计算每个区域中的峰数(单个粒子)。唯一需要的测量是区域中观察到的峰数(最大值)和峰标准偏差以及区域的持续时间。为估计的峰数的精度和由于峰数波动而不建议进行计算的阈值饱和度开发了理论。理论表明,当饱和度在 0.2 和 1.0 之间时,相对精度较好,当饱和度略大于 0.5 时,精度最佳。它还表明,阈值饱和度取决于峰标准偏差除以区域持续时间。通过具有恒定和非均匀峰密度的计算机模拟验证了细胞器 CE 不同区域中峰数估计的准确性和精度。估计值的准确度高达 6%。使用不同区域中的估计峰数来计算迁移时间和电泳迁移率分布。与通过计数最大值确定的分布相比,这些分布受峰重叠的影响较小,并且提供了细胞器性质的更正确的度量。该程序应用于线粒体 CE,其中超过 20%的峰被峰重叠隐藏。