Curriculum in Applied Sciences and Engineering, University of North Carolina at Chapel Hill, Chapel Hill, North Carolina 27599, USA.
J Biomed Nanotechnol. 2009 Apr;5(2):182-91. doi: 10.1166/jbn.2009.1024.
We report on the fabrication of arrays of mono- and multimetallic particles via metal evaporation onto lithographically patterned posts, as well as the magnetic force calibration and successful magnetofection of iron particles grown via this method. This work represents the first instance in which metal evaporation onto post structures was used for the formation of released, shape-defined metal particles. Also, our work represents the first use of lithographically defined particles as agents of magnetofection. Using these techniques it is possible to create particles with complex shapes and lateral dimensions as small as 40 nm. Our demonstrated compositionally flexible particles are highly size-uniform due to their photolithographically defined growth substrates, with particle dimensions along two axes fixed at 200 nm; the third axis dimension can be varied from 20 nm to 300 nm during the deposition procedure. Atomic percent of metals incorporated into the particle volume is highly tunable and particles have been synthesized with as many as four different metals. We performed magnetic force calibrations on a single particle size for iron particles using an axially magnetized NeFeB permanent magnet and comparisons are made with commercially available magnetic beads. In order to evalutate their usefulness as magnetofection agents, an antisense oligonucleotide (ODN) designed to correct the aberrant splicing of enhanced green fluorescent protein mRNA, was successfully transfected into a modified HeLa cell line. Magnetically enhanced gene delivery was accomplished in vitro using antisense ODN-laden iron particles followed by application of a field gradient. Magnetically enhanced transfection resulted in a 76% and 139% increase in fluorescence intensity when compared to Lipofectamine and antisense ODN-loaded particles delivered without magnetic treatment, respectively. To our knowledge, these experiments constitute the first use of lithographically defined particles as successful agents for magnetically enhanced transfection of an antisense oligonucleotide.
我们报告了通过金属蒸发在光刻图案化柱上制造单金属和多金属颗粒的阵列,以及磁力校准和通过这种方法生长的铁颗粒的成功转染。这项工作代表了首次将金属蒸发到柱结构上用于形成释放的、形状定义的金属颗粒。此外,我们的工作代表了首次使用光刻定义的颗粒作为转染剂。使用这些技术,可以创建具有复杂形状和最小横向尺寸为 40nm 的颗粒。我们展示的组成灵活的颗粒由于其光刻定义的生长基底而具有高度尺寸均匀性,两个轴上的颗粒尺寸固定为 200nm;在沉积过程中,第三轴尺寸可以从 20nm 变化到 300nm。金属掺入颗粒体积的原子百分比高度可调,已经合成了多达四种不同的金属颗粒。我们对单个铁颗粒尺寸进行了磁力校准,使用轴向磁化的 NeFeB 永磁体,并与市售的磁性珠进行了比较。为了评估它们作为转染剂的有用性,我们成功地将一种设计用于纠正增强型绿色荧光蛋白 mRNA 异常剪接的反义寡核苷酸(ODN)转染到改良的 HeLa 细胞系中。通过应用磁场梯度,使用载有反义 ODN 的铁颗粒进行体外磁增强基因传递。与未进行磁处理的 Lipofectamine 和载有反义 ODN 的颗粒相比,磁增强转染分别导致荧光强度增加了 76%和 139%。据我们所知,这些实验首次使用光刻定义的颗粒作为成功的反义寡核苷酸磁增强转染剂。