Joule Physics Laboratory, Faculty of Science, Engineering and Environment, The University of Salford, Manchester M5 4WT, United Kingdom.
J Chem Phys. 2009 Dec 28;131(24):244708. doi: 10.1063/1.3272670.
A study of the structure of stable regular-shaped nanocrystals of hexa-acylated (C(14)) lipid A-monophosphate from Escherichia coli was carried out using dilute electrostatically stabilized aqueous dispersions at low ionic strength (I=1.0x10(-5)M NaCl). An order-to-order transition of colloidal clusters of lipid A-monophosphate was found at two volume fractions: phi=5.9x10(-4) and phi=11.5x10(-4). The clusters belonged to the cubic space groups Pm3n and Ia3d with unit-cell dimensions of a=4.55 nm and a=6.35 nm, respectively, as revealed by small-angle x-ray diffraction and electron-diffraction results of thin nanocrystals of lipid A-monophosphate. When viewed in the scanning electron microscope these fragile clusters displayed a number of shapes: cubic, cylindrical, and sometimes-rounded hexagons, which were extremely sensitive when exposed to an electron beam. The smallest and most numerous of the clusters appeared as approximately 7 nm cubes. Crystalline cluster formation occurred over a wide volume-fraction range, between 1.5x10(-4) and 40.0x10(-4), and at temperatures of 20 and 35 degrees C. The crystalline networks of the lipid A-monophosphate clusters may be represented by space-filling models of two pentagonal dodecahedra with six tetrakaidecahedra arrangements of lipid A-"micelles" in the cubic space group Pm3n. The simulated electron density profiles are in accord with spherical clusters of lipid A-monophosphate at the corners and at the body centers of the cubic Pm3n unit cell. The profiles are rounded tetrahedrally at distances of 1/4 and 3/4 along one of the bisectors of each face of the cubic unit cell. These nanocrystalline systems provide examples of "cellular" crystalline networks, which rearrange themselves spontaneously into three-dimensional polyhedral structures. It appears that a closely related analogy exists between the tetrahedrally close-packed networks as revealed for the lipid A-mono- and diphosphates [C. A. Faunce, H. Reichelt, H. H. Paradies, et al., J. Chem. Phys. 122, 214727 (2005); C. A. Faunce, H. Reichelt, P. Quitschau, et al., J. Chem. Phys. 127, 115103 (2007)]. However, the cubic Ia3d phase consists of two three-dimensional networks of rods, mutually intertwined but not connected. For this cubic Ia3d phase each junction involves three coplanar rods at an angle of 120 degrees, showing an interwoven labyrinth of lipid A-monophosphate rods which are connected three by three. The rod diameter is approximately 2.2 nm, which is similar in diameter to the disk-shaped aliphatic chiral core of lipid A-monophosphate (2.14 nm) with an ellipticity of 0.62 seen for the "c" position of the tetrakaidecahedra in the Pm3n cubic unit cell. An epitaxial relationship appears to exist between the {211} planes of the cubic Ia3d phase and the (001) planes of the lamellar phase as well as with the {10} planes of the hexagonal phase. The transformation of the cubic into the hexagonal phase can be reconciled by the growth of a cylinderlike assembly of lipid A-monophosphate molecules of the hexagonal phase parallel to the 111 directions of the cubic Ia3d phase. Upon cooling from 35 to 20 degrees C the cubic Ia3d lipid A-monophosphate phase unexpectedly transforms and gives rise to an intermediate R3m structure (a=3.90+/-0.12 nm, c=7.82+/-0.05 nm, and gamma=120 degrees). Both cubic Ia3d and hexagonal R3m phases originate from similar rodlike units of lipid A-monophosphate clusters. However, the overall shapes of the assemblies are different because of their spatial distribution. Both assemblies morphologically bridge the lipid A-monophosphate hexagonal and and lamellar phases. The structural path followed during the phase transitions is governed by topological similarities between the phase which forms and the one from which it originates. Although the two phases, Ia3d and R3m, have similar curvature energies on cooling, the topology is more than likely to be the initial factor determining the overall phase transition path.
对大肠杆菌中六酰化(C(14)) 脂酰基单磷酸的稳定规则形纳米晶体的结构进行了研究,方法是在低离子强度(I=1.0x10(-5)M NaCl)下使用稀静电稳定的水基分散体。在两个体积分数下发现了脂酰基单磷酸胶体簇的有序到无序转变:phi=5.9x10(-4) 和 phi=11.5x10(-4)。通过小角度 x 射线衍射和薄脂酰基单磷酸纳米晶体的电子衍射结果揭示,这些簇分别属于立方空间群 Pm3n 和 Ia3d,具有单元胞尺寸 a=4.55nm 和 a=6.35nm。当在扫描电子显微镜下观察时,这些脆弱的簇表现出许多形状:立方、圆柱和有时是圆形的六边形,当暴露于电子束时它们非常敏感。最小和最多的簇出现为大约 7nm 的立方体。结晶簇的形成发生在很宽的体积分数范围内,介于 1.5x10(-4) 和 40.0x10(-4) 之间,温度为 20 和 35 摄氏度。脂酰基单磷酸簇的结晶网络可以用立方空间群 Pm3n 中具有六个十四面体排列的脂酰基“胶束”的两个五角二十面体的空间填充模型来表示。模拟的电子密度分布与立方 Pm3n 单元胞角和体心处的脂酰基单磷酸球形簇相符。在立方单元胞各面的二等分线的 1/4 和 3/4 处,分布呈圆形四面体。这些纳米晶体系统提供了“细胞”结晶网络的例子,这些网络可以自发地重新排列成三维多面体结构。似乎在脂酰基单磷酸和二磷酸中存在密切相关的类似情况 [C. A. Faunce, H. Reichelt, H. H. Paradies, et al., J. Chem. Phys. 122, 214727 (2005); C. A. Faunce, H. Reichelt, P. Quitschau, et al., J. Chem. Phys. 127, 115103 (2007)]。然而,立方 Ia3d 相由两个相互交织但不相连的三维棒状网络组成。对于这种立方 Ia3d 相,每个结涉及三个共面的棒,以 120 度角相交,显示出脂酰基单磷酸棒的交织迷宫,这些棒以三比三的方式连接。棒的直径约为 2.2nm,与脂酰基单磷酸的盘状脂肪族手性核(2.14nm)的直径相似,在 Pm3n 立方单元胞的“c”位置观察到的四十四面体的椭圆率为 0.62。似乎立方 Ia3d 相的{211}平面与层状相的(001)平面以及六方相的{10}平面之间存在外延关系。通过沿立方 Ia3d 相的 111 方向平行生长脂酰基单磷酸的六方相的圆柱形组装体,可以协调立方相到六方相的转变。从 35 摄氏度冷却到 20 摄氏度时,出人意料的是,立方 Ia3d 脂酰基单磷酸相发生转变,产生了一个中间 R3m 结构(a=3.90+/-0.12nm,c=7.82+/-0.05nm,和 gamma=120 度)。立方 Ia3d 和六方 R3m 相都起源于类似的脂酰基单磷酸簇的棒状单元。然而,由于它们的空间分布,组装体的整体形状不同。两个组装体在形态上连接了脂酰基单磷酸的六方相和层状相。相转变过程中遵循的结构路径由形成相和起源相之间的拓扑相似性决定。尽管在冷却时 Ia3d 和 R3m 相具有相似的曲率能,但拓扑结构很可能是决定整体相转变路径的初始因素。